Ningbo Cstar Imp Exp SL353 True Wireless Earbuds with Speaker Case User Guide

Ningbo Cstar Imp Exp SL353 True Wireless Earbuds with Speaker Case User Guide & troubleshooting

Ningbo Cstar Imp Exp SL353 True Wireless Earbuds with Speaker Case User Guide  & troubleshooting 1

Ningbo Cstar Imp Exp SL353 True Wireless Earbuds with Speaker CaseNingbo Cstar Imp Exp SL353 True Wireless Earbuds with Speaker Case User Guide  & troubleshooting 2

TRUE WIRELESS EARBUDS WITH SPEAKER CASE QUICKSTART GUIDE FCC ID: 2ABHA0069 (Earbuds) FCC ID: 2ABHA0102 (Speaker case)  

GETTING STARTED

  • Type-C charging port
  • Speaker Case LED indicators 3 Left earbud LED indicator 4 Left control button
  • Right earbud LED indicator6 Right control button
  • Left Mic
  • Right Mic
  • Speaker Case Power ButtonLeft
    • Earbud / Right Earbud Pause/Play/Answer Call/End CallNingbo Cstar Imp Exp SL353 True Wireless Earbuds with Speaker Case User Guide  & troubleshooting 3

CHARGING YOUR CASE

  • Charge the speaker case, with the, included Type-C -cable for 4 hours. The LED indicator will light red during charging and turning ed off after fully charged Do not charge longer than the suggested time. Do not charge overnight.

CHARGING YOUR EARBUDSNingbo Cstar Imp Exp SL353 True Wireless Earbuds with Speaker Case User Guide  & troubleshooting 4

  • Place Right and Left Earbuds in the speaker case
  • The earbud LED indicators (3, 5) will illuminate Red, indicating that the earbuds are charging properly.
    • (Special note: if the Led indicator flashing blue and red, place it correctly until the Led indicator lights become solid red). When Earbuds LEDs (3, 5) turns off, earbud batteries are fully charged.

MONO MODE (SINGLE EARBUD USE) Ningbo Cstar Imp Exp SL353 True Wireless Earbuds with Speaker Case User Guide  & troubleshooting 5

  • Remove earbud from charging case
  • One the earbud is powered on, It will automatically proceed to pair

STEREO MODE (DUAL EARBUD USE)

  • Ningbo Cstar Imp Exp SL353 True Wireless Earbuds with Speaker Case User Guide  & troubleshooting 6 Remove both earbuds from the charging case and hold them close to each other
  • Earbuds will automatically link together after a few seconds and you will hear an alert tone.
  • One of the earbuds will flash red and blue, the other earbud will turn off LED indicator.
  • Once Earbuds are linked together you may proceed to pair them with your mobile device.

Note

  1.  If you attempt to pair before the earbuds have paired to each other, the earbuds will go into single earbud use.
  2. In this case, restart the process (Select forget device from your Bluetooth List). Once they are paired successfully, the indicator of one earbud will turn off.

PAIRING

  1. Enable Bluetooth search mode on your mobile device and search for the pairing name “ True Wireless headset” and select it on your mobile phone.
  2. Once the earbuds are successfully paired, a notification will sound.
  3. Now you can enjoy your truly wireless Bluetooth Earbuds.Ningbo Cstar Imp Exp SL353 True Wireless Earbuds with Speaker Case User Guide  & troubleshooting 7

Note: Once earbuds have been initially paired successfully with your mobile device, they will automatically pair the next time they are powered on.

SPECIFICATION:

  • Earbuds Model: SL353
  • Item No. :2443
  • Capacity: 35mAh/3.7V(0.1295Wh)
  • Input: 5V/60mA Speaker
  • case: Model: SL510
  • Item No. 2439
  • Capacity:2000mAh/3.7V(7.4Wh)
  • Input: 5V/600mA
Function Operation
Earbuds
 

Power On

Press (4) or (6) for 3 seconds or

remove the earbuds from

charging case

 

Power Off

Press (4) or (6) for 5 seconds or

place the earbuds in the charging

case

Play/Pause Single press (4) or (6)
Answer Single press (4) or (6)
Reject Press (4) or (6) for 2 seconds
Recall Double (4) or (6)
Earbuds LED indications (3) & (5)
Power On Red and Blue LED will flash alternately
Link Mode Flashing Blue + Red
Two earbuds paired successfully

each other

One earbud will flash red and blue,

another earbud will turn off the LED indicator.

Paired Successfully LED Off
Power Off LED Off
Charging Flash Red
Fully Charged LED off
Speaker
Power ON/OFF Long press the power button (9)
Play/Pause Press once the power button (9)
Speaker case pairing each other Double press the power button (9)
Resume setting Four press the power button (9)

SPEAKER CASE OPERATION

MONO MODE

  • Long press the power button to turn on the speakerEnable Bluetooth search mode on your mobile device and search for the pairing name “ 2439” and select it on your mobile phone.
  • Once the earbuds are successfully paired, a notification will sound.
  • Now you can enjoy your speaker case.

Note: Once the speaker has been initially paired successfully with your mobile device, it will automatically pair the next time when it is powered on.

STEREO MODE

  1.  Long press the power button to turn on the two speakers at the same time.
  2.  Double press the power button (9)of one of speakers, they will automatically link together after a few seconds.
  3. Once both speakers are linked together, you can proceed to pair them with your mobile device.

Note

If you attempt to pair before the speaker has paired to each other, it will go into single earbud use. In this case, restart the process (Select forget device from your Bluetooth List first).

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference
  2. This device must accept any interference received, including interference that may cause undesired operation.

Warning

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. The interference potential of the device or system. Maintenance of the system.  Simple measures can be taken by the user to correct the interference. For RF lighting devices, provide an advisory statement, either on the product packaging or with other user documentation

Similar to the following

  •  This product may cause interference to radio equipment and should not be installed near maritime safety communications equipment or other critical navigation or communication equipment operating between 0.45-30 MHzTh ®e Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc., and any use of such marks by (Shenzhen C-Star Electronics Tech.
  • (Co., Ltd.) is under license. Other trademarks and trade names are those of their respective owners.
  • Bluetooth Listing Declaration ID: D050169 Made in China

FAQ


Setting up Ningbo Cstar Imp Exp SL353 True Wireless Earbuds with Speaker Case User Guide is easy with these step-by-step instructions. Follow the steps are you are set-up in no time.

Using Ningbo Cstar Imp Exp SL353 True Wireless Earbuds with Speaker Case User Guide is simple by using this manual. Follow the instructions one by one and everything will be fine

Is Ningbo Cstar Imp Exp SL353 True Wireless Earbuds with Speaker Case User Guide stuck or not working properly? By resetting it you can set it back to the standard settings and everything should be back to normal. This works in many cases when problems arise.

This page contains the complete user instructions & manual for Ningbo Cstar Imp Exp SL353 True Wireless Earbuds with Speaker Case User Guide

All symbols, colors and codes for Ningbo Cstar Imp Exp SL353 True Wireless Earbuds with Speaker Case User Guide are explained in this instruction manual. You can find everything you need and moree