Nohro Wireless Charger User Manual

Nohro Wireless Charger User Manual & troubleshooting

Nohro Wireless Charger User Manual
Nohro Wireless Charger User Manual  & troubleshooting 1

Please read this user manual carefully before use and keep for future reference.

Product Overview

Nohro Wireless Charger User Manual  & troubleshooting 2

Wireless charging standard

Not all devices are compatible with Qi charging standard. This device is compatible with all devices that are compatible with Qi wireless charging standard. Your device might need an external wireless charging receiver (not  included) to work with this wireless charger

Technology

Nohro Wireless Charger User Manual  & troubleshooting 3

Assembly Instruction

  1. Rotate the screw cap to release the holder.
    Nohro Wireless Charger User Manual  & troubleshooting 4
  2. Input: Connect the wireless charger and a USB port with the included USB-C wire. To use the fast charging feature, the output of your USB port must support up to 9 V – 1.2 A.
    Nohro Wireless Charger User Manual  & troubleshooting 5
  3. Press the button on the clip to fix the holder in the airduct. Attach the holder and a adjust for best viewing angle. Then tighten screw cap.
    Nohro Wireless Charger User Manual  & troubleshooting 6
  4. Place your smartphone in the holder. The locking mechanism will automatically open when infrared sensor is activated. When the smartphone is placed in the holder, the locking mechanism will automatically close to grip the smartphone.
    Nohro Wireless Charger User Manual  & troubleshooting 7
  5. To remove the smartphone, press the button on the side of the holder, the locking mechanism unclamps the smartphones
    Nohro Wireless Charger User Manual  & troubleshooting 8
  6. LED light. indicating status:
    1. Blue light indicating proper working order.
    2. Red lights indicating that the charger is not in working order.
      Nohro Wireless Charger User Manual  & troubleshooting 9

Nohro Wireless Charger User Manual  & troubleshooting 10 Attention

  1. Please keep the charger away from water and other liquids.
  2. If you need to clean the charger, please make sure it is not connected to a power supply.
  3. Operation temperature: 20 – 45° C.

Charging failure, LED light flashing

The following situations may cause charging failures or high temperature.

  1. The USB port does not meet the requirements.
  2. The charging cable is not in working order.
  3. The smartphone cover is to thick (recommended cover thickness max to 2 mm).
  4. The phone is not placed at the middle of the wireless charger.
  5. There is metal or magnet on the back of the smartphone or cover.
  6. The smartphone does not support Qi wireless charging.

Product specifications

Fast charging wireless charger.

  • Input: 5 V- 2 A / 9 V- 1.67A
  • Output: 5 V – 1.5 A / 9 V – 1.2 A
  • Charging Efficiency: 75 %

Email: [email protected]

FAQ


Setting up Nohro Wireless Charger User Manual is easy with these step-by-step instructions. Follow the steps are you are set-up in no time.

Using Nohro Wireless Charger User Manual is simple by using this manual. Follow the instructions one by one and everything will be fine

Is Nohro Wireless Charger User Manual stuck or not working properly? By resetting it you can set it back to the standard settings and everything should be back to normal. This works in many cases when problems arise.

This page contains the complete user instructions & manual for Nohro Wireless Charger User Manual

All symbols, colors and codes for Nohro Wireless Charger User Manual are explained in this instruction manual. You can find everything you need and moree