omega Rangehood Instruction Manual

omega Rangehood Instruction Manual  & troubleshooting 0

Instruction Manual


Thank you for purchasing an Omega appliance

Tailored for the modern aesthetic and lifestyle of busy people, your new Omega Appliance will make a welcome addition to the family.

Omega caters to style-savvy customers who look for balance between stunning form and clever function. This means a combination of sleek, chic, sophisticated design yet effortless functionality. And we source from the best. The best craftsmanship. The best innovation. From the best international design-houses.

All brought together under an appliance that stands for design-led balance.

Please take the time to read through the following instruction manual to familiarise yourself with the installation, operation requirements and maintenance to ensure optimum performance.

Further Information

For important information about your Omega Appliance such as warranty registration, manuals, features, and specifications please visit (if you are in Australia) and (if you are in New Zealand) or contact our Customer Care team on the below email or phone numbers.

Registering Your Warranty

For peace of mind you can register your warranty at Further information on the Warranty can be found at the end of this manual.

Contact Us

Our customer service team is here to help you with any question or concern.
They are on call Monday to Friday 8.30am to 5.00pm and of course you can always send a email at your convenience.

Email: [email protected]
Phone: 1300 739 033

To stay up to date and find simple and easy recipes, follow us on our socials:


It is important that you retain these instructions, proof of purchase as well as other important documents about this product for future reference.
The manufacturer will not be responsible for any damage to property or to persons caused by incorrect installation or improper use of the appliance.

Due to continual product development, Omega reserves the right to alter specifications and appearances without notice.

Disposal Information

  • Most of the packaging materials are recyclable. Please dispose of these materials through your local recycling depot or by placing them into appropriate collection containers.
  • If you wish to discard this product, please contact your local authorities and ask for the correct method of disposal.
Important Safety Warnings

IMPORTANT: Read the assembly instruction section and safety precautions of this booklet carefully before removing the contents of this carton.

  1. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience or knowledge, unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety. Young children should be supervised to ensure that they do not play with the appliance.
  2. Do not check the status of the filters whilst the cooker hood is operating.
  3. Do not touch the light bulbs after use.
  4. Do not disconnect the appliance with wet hands.
  5. Do not disconnect the power supply by pulling on the cable.
  6. Do not flambé underneath the range hood.
  7. Avoid free flame, as it may cause damage to the filters and can be a fire hazard.
  8. Unplug the appliance before carrying out maintenance, cleaning or replacing lamps.
  9. If the power cord is damaged, it must be replaced by the manufacturer, an authorised service centre or similarly qualified persons to avoid a hazard.
  10. For indoor use only.
  11. It is recommended to operate the range hood prior to cooking.
  12. It is recommended to leave the range hood in operation for 15 minutes after cooking is terminated in order to completely eliminate cooking vapours and odours.
  13. Turn off the range hood when not in use.
  14. Do not use the range hood if it is damaged, especially the supply cord and the case.
  15. Do not immerse the range hood in liquid.
  16. The exhaust air must not be discharged into a flue which is used for exhausting fumes from an appliance burning gas or other fuels.
  17. Regulations concerning the discharge of air have to be fulfilled.
  18. There shall be adequate ventilation of the room when the range hood is used at the same time as appliances burning gas of other fuels (not applicable to appliances that only discharge the air back into the room).
  19. Clean the surface of the cooker hood regularly using a cloth moistened with denatured alcohol or a non-abrasive liquid detergent.
  20. There is a fire risk if cleaning is not carried out in accordance with the instructions.
  21. The range hood must be mounted at a minimum distance of 600mm above the cooking surface.
  22. CAUTION: Accessible parts may become hot when used with cooking appliances.
  23. Warning: Failure to install the screws or fixing device in accordance with these instructions may result in electrical hazards.


Appliance Details

Electrical Details
Voltage 220 – 240V 50Hz
Rated Power Input 271W
Lamp Max 2x3W GU10 LED
omega Rangehood Instruction Manual  & troubleshooting 1
omega Rangehood Instruction Manual  & troubleshooting 2


Lamp Replacement

Warning: Before attempting to replace the lights, ensure that the appliance is switched off and unplugged from the wall.

omega Rangehood Instruction Manual  & troubleshooting 3

  • Remove the aluminium filter.
  • Press the lamp face and turn anti-clockwise to remove.
  • Replace with the same type of bulb (GU10 Base, 3W MAX).
    Max Wattage: 2 x 3W
    Voltage Range: 220 ­ 240V AC
    ILCOS D Code: DR-3/65/1B-H-GU10-46/50
  • Replace the aluminium filter.


Installation Instructions

Warning: Failure to install the screws or fixing device in accordance with these instructions may result in electrical hazards.

  • Please ensure that all power is switched off before installing the range hood.
  • Installation must be in accordance to the local electrical authority and codes.
  • The switched power outlet for the range hood should be positioned to enable the user to turn the
    power off, to enable cleaning and any maintenance required.
  • The switched power outlet should be installed within 600mm from the rear of the unit.
  • Ensure that when installing the range hood, that it is protected from any possible damage from tools etc.
  • Ducting for this unit must be installed in accordance to the local authority.
  • Ensure that the fixings used for this range hood are suitable.
  • Check the area where the range hood is to be fitted, to ensure that it is structurally sound.
  • Before using the appliance, remove the plastic coatings protecting the stainless steel finish.
  • These models are intended to be installed into kitchen cabinetry. Take care that the cabinetry and supporting wall can carry the weight of the rangehood.
  • Always double-check dimensions in this manual against the appliance before commencing.

The rangehood should be placed at a minimum distance of 600mm from the cooking surface of the cooker below. Any more than 750mm could compromise the performance of the appliance.

  • Drill a hole in the cupboard, 665 x 265 mm for model ORU70MB and 865 x 265 mm for model ORU90MB. Make sure the distance between the edge of the hole and the edge of the cupboard edge is at least 35mm.
  • Remove the filter and remove the four screws holding the front panel in place. Lift the appliance into the hole and check that it fits correctly (no gaps, does not interfere with anything above it etc.).
  • Mark the hole positions with a pencil, remove the appliance and pre-drill the holes using a small drill bit. Place the appliance back into position, line up the holes and fix into place using the 8 screws provided. Replace the cover & fix into position with the 4 screws and fit the filter. Fit the one way filter to the top of the unit.
  • The exhaust air vents through the one way valve at the top. If the exhaust is to be vented away, cut a hole (~Ø160mm) in the top of the cupboard, and connect Ø150mm ducting to the one way valve & pass it through the hole to wherever it is going. If the exhaust air is to be recirculated back into the room, either cut vents into the cupboard (with a minimum area of 800cm²), or leave the cupboard door open when in use.
  • Once assembled in place, the appliance can be connected to the power supply.

omega Rangehood Instruction Manual  & troubleshooting 4


Operating Instructions

With the appliance fully installed and the power connected, the appliance can be used.

omega Rangehood Instruction Manual  & troubleshooting 5

1. Lamp -­ Turn on/off light

O -­ to switch off light
I -­ to switch on light

2. Speed -­ Select speed to suit cooking conditions

O ­- to switch off motor
I (Low) -­ light frying/boiling
II (Medium) ­- frying/wok cooking/heavy boiling
III (High) ­- grilling, intensive frying and wok cooking

Power ­- Slide out drawer to power on
-­ Slide in drawer to power off




Before cleaning your rangehood or performing any maintenance, please ensure that the rangehood is turned off at the power point.

Do not use abrasive cleaners to clean the rangehood. The use of warm soapy water and a cloth are recommended. Ensure that the rangehood is cleaned regularly, as a build-up of grease and fat may occur otherwise.

The filters on the rangehood must be cleaned regularly to maintain efficiency, and prevent grease build up. The filter mesh is made of a high density Stainless Steel. It is recommended that this is undertaken every 4 ­- 6 weeks, depending on frequency of use. The filters can be cleaned with warm soapy water or a cloth.

Cleaning of the rangehood must be performed as described above; otherwise there is a possibility of a fire hazard due to grease and fat build up.




Possible Cause


Light on, but motor does not work Fan switch turned off Select a fan switch position
Fan switch failed Contact Omega Service
Motor failed Contact Omega Service
Light does not work, motor does not work House fuses blown Reset/replace fuses
Power cord loose or disconnected Refit cord to power outlet Switch power outlet on
Oil Leakage One-way valve and the air ventilation entrance are not tightly sealed Take down the one-way valve and seal with sealant
Leakage from the connection of U-shaped section and cover Take U-shaped section down and seal
Lights not working Broken/faulty LED lamp Contact Omega Service
Insufficient suction The distance between the rangehood and gas top is too far Refit the rangehood to the correct distance
The rangehood inclines The fixing screws are not tight enough Tighten the hanging screw and make it horizontal


Australian & New Zealand Product Warranty Statements of Standard Warranty Conditions

Australian Customers

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

New Zealand Customers

Nothing herein contained shall be construed in any way as excluding or limiting your rights under the Consumer Guarantee Act 1993.

Our Warranty

This product is also covered by the manufacturer’s warranty set out in this document (Our Warranty).
Our Warranty is for a period of twenty four (24) months from the date of purchase and for refrigeration appliances will have an additional thirty six (36) months after the first twenty four (24) months on the Sealed System (PARTS only) Compressor & condenser etc. The labour cost to replace these parts is the responsibility of the customer. This is in addition to (and does not exclude, restrict or modify) any rights or remedies to which you may already be entitled under the Australian Consumer Law or the New Zealand Consumer Guarantee Act 1993 relating to this product. Our Warranty (which is subject to the conditions below) covers rectification free of charge of any fault arising from defective materials or components, or faulty workmanship. The product will be repaired or replaced at the option of Omega, and all costs of installation, removal, cartage, freight travelling expenses and insurance are to be paid by the customer. Our Warranty is subject to the following conditions:
1. That the purchaser contact Omega prior to any product repair.
2. That the purchaser carefully follows all instructions provided with the product and complies with all relevant electrical & plumbing regulations in their State when installing the product.
3. That the purchaser carefully follows the instructions provided in the owner’s handbook relating to the proper use and care of the product and does not use the product for any purpose other than the DOMESTIC use for which it has been designed. If the appliance is used in commercial applications or for rental purposes, Our Warranty is limited to a warranty of Twelve (12) months covering all parts with Three (3) months on any labour cost of service or repair.

Service Area

The provision of service under Our Warranty is limited by the boundary / territory area of the nearest service centre. Travelling cost incurred for service outside this area is not covered by Our Warranty and service will incur commercial cost to be paid by the customer regulated by the number of kilometres travelled beyond the service area. These costs will be disclosed to you for acceptance by you prior to your claim being processed. Microwave ovens must be returned to your nearest Authorised Service Centre for repair as they are a carry in serviceable appliance.

What is Covered by our Warranty

During the warranty period, Omega or its authorised Service Centre will, at no extra charge, if your appliance is readily accessible without the need of special equipment and subject to the terms and conditions of this warranty, repair or replace any parts which it considers defective.

What is not Covered by our Warranty
  1. Products installed damaged or incomplete or not in compliance with the relevant electrical & plumbing regulations in their State.
  2. Normal wear and tear e.g. cleaning, light globes, filters etc.
  3. Failure resulting from power surges and electrical storms.
  4. Insect or vermin infestation.
  5. Unauthorised repairs or use of non genuine Omega parts.
  6. Any failure caused by the product not being used in accordance with the instruction and the installation manual provided with the product.
  7. Misuse or abuse, including failure to properly maintain or service.
  8. The clearing of blockages in pumps and hoses.
  9. Damage which occurs during delivery or installation.
  10. Claims to product surface coating due to liquid or solid spill-overs, accidental damage or damage caused from cleaning products not recommended by Omega.
How to Claim Our Warranty

While registering your warranty is not a requirement, for peace of mind you can register your warranty at
To make a claim under Warranty you will need to contact Omega in Australia or New Zealand by using the contact details below.
If you are contacting Omega regarding any warranty claims and spare parts inquiries, please make sure you have the following information on hand:

  1. Product Name/Model Number
  2. Serial Number/s
  3. Purchase Date (as per invoice or proof of purchase)
  4. Purchased From
  5. Warranty Registration Number (if registered)

Contact Us Australia
Omega is a division of Shriro Australia Pty Ltd
ABN 28 002 386 129
Phone: 1300 739 033
Email: [email protected]

Contact Us New Zealand
Omega is a division of Monaco Corporation (Member of Shriro Australia Pty Ltd)
Phone: 09 415 6000
Email: [email protected]


 omega Rangehood Instruction Manual  & troubleshooting 6

omega Rangehood Instruction Manual  & troubleshooting 7 omegaappliances                   Email: [email protected]

omega Rangehood Instruction Manual  & troubleshooting 8 @omegaappliances_aus         Phone: 1300 739 033   



Setting up omega Rangehood Instruction Manual is easy with these step-by-step instructions. Follow the steps are you are set-up in no time.

Using omega Rangehood Instruction Manual is simple by using this manual. Follow the instructions one by one and everything will be fine

Is omega Rangehood Instruction Manual stuck or not working properly? By resetting it you can set it back to the standard settings and everything should be back to normal. This works in many cases when problems arise.

This page contains the complete user instructions & manual for omega Rangehood Instruction Manual

All symbols, colors and codes for omega Rangehood Instruction Manual are explained in this instruction manual. You can find everything you need and moree