2009-2014 FORD F-150
BLUETOOTH CONTROL BOX
10FT EXTENSION CABLE
HARDWIRE POWER HARNESS
SCREWDRIVERS (+ AND -)
Remove the 2 bolts on top of the headlight.
Release the plastic clip.
Remove the last bolt retaining the headlight
Pull forward to free the headlight assembly.
Unclip the electrical connectors on the back of the headlight housing.
Reattach the electrical connectors to the new headlight housing. Black and Green Wires: Not needed a connection for DRL Tube to function. Ensure the wires are tied up securely to ensure wires are organized and store away from any metal surface.
Install the Aura Control Box by connecting the positive wire for a constant on functionality (always on when battery is on) or an accessory wire (only on when the vehicle is on) which can be found in the Fuse Box. Connect the negative wire to a ground wire.
Connect the round connector from the headlight housings to the control box.
Line up the headlight housing mounting tabs and push rearward to seat it in place.
Attach the 3 bolts to secure the headlight in place.
Replace the plastic clip.
Test out your headlights using the AURA App.
OPT7 Lighting is not liable for damages or personal injuries while installing this product. The Installation Guide is intended as assistance to reduce setup time. OPT7 Lighting assumes no responsibility for improper installation. If you are unfamiliar with your vehicle or inexperienced with aftermarket upgrades, please seek professional assistance.
Scan for tutorial videos, troubleshooting tips, and more.