Customer Service Made EL!
• User-Friendly Interface
• File Warranty Claim
• Download Product Manuals
• Follow-up within 24 Hrs
• Email your questions or concerns
• Parts Ship within 48 Hrs.
Parts distribution is made from our Carrollton, TX warehouse facility.
Please do not return this product to the retailer.
If you are missing or have damaged parts please email
[email protected] Or Call 877-477-2264
3pc Bistro Set
Sku: 207004, 207005, 207006
Read the instructions and precautions before use of this product
Please keep this instruction manual for future reference
For warranty information, please refer to the back page of this instruction manual.
Tighten all fasteners.
Thread studs (G) into holes on bottom of chair back (A). Insert studs (G) on chair back (A) through holes on chair seat (B) topside.
With chair back (A) in place, thread studs in bottom holes of chair seat (B) next to studs of chair back. Insert chair leg (C) onto chair seat (B) studs, connecting the chair back, seat and leg.
Secure leg, seat and back with washers (I) and nuts (J).
Attach remaining legs, repeat step 2 and step 3.
Assembly second chair in same manner, repeat steps 1 – 4.
CAUTION: DO NOT over tighten fasteners
Position table top (D) upside down on a clean surface. Thread studs (G) into holes on bottom of table top (D).
Place the holes at top of leg (E) over threaded studs (G) on bottom of table top (D).
Secure using washers (I) nuts (J). Do not over tighten fasteners.
Attach remaining legs, repeat step 7 and step 8.
Position table right side up.
Place table center brace (F) on top of tabs on table leg (E) and align holes.
Insert bolt (H) through top of table center brace (F) and table leg tab. Secure with washer (I) and nut (J).
CAUTION: DO NOT overtighten fasteners
J & J Global, LLC (Seller) warrants to the original Buyer only, that each product will be free from defects in material and workmanship for a period of one (1) year from the date of purchase. SELLER’S SOLE OBLIGATION AND BUYER’S EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY SHALL BE THE REPAIR OR REPLACEMENT OF PARTS, WITHOUT CHARGE, WHICH ARE DEFECTIVE IN MATERIAL OR WORKMANSHIP ANY PARTS AS DETERMINED BY THE SELLER WHICH HAS BEEN MISUSED; ABUSED, OR DAMAGED EITHER DIRECTLY OR INDIRECTLY FROM REPAIRS OR ALTERATIONS ATTEMPTED BY UNAUTHORIZED PERSON; IMPROPER MAINTENANCE, NEGLECT OR ACCIDENT ARE NOT COVERED BY THIS LIMITED WARRANTY. This warranty does not apply to damage, heat-induced coloration changes, scratching, or alteration due to normal use or weathering. To make a claim under this Limited Warranty, email [email protected] or visit www.ezreplacement.com for warranty questions and claims.
THIS LIMITED WARRANTY DOES NOT APPLY TO ACCESSORY OR CONSUMABLE ITEMS RELATED TO THIS PRODUCT. ALL IMPLIED WARRANTIES SHALL BE LIMITED IN DURATION TO ONE (1) YEAR FROM THE DATE OF PURCHASE. IN NO EVENT SHALL THE SELLER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES, INCLUDING BUT NOT LIMITED TO LIABILITY FOR LOSS OF PROFITS, ARISING FROM THE SALE OR USE OF THIS PRODUCT.
If any provision of this Limited Warranty is for any reason held to be invalid or unenforceable, such provision shall not affect any other provision herein, this Limited Warranty shall be construed as if such invalid and/or unenforceable provision had never been contained herein.
This warranty gives you special legal rights, and you may also have other rights which vary from state to state. This warranty contains the entire agreement between Seller and Buyer and supersedes any and all prior agreements, arrangements, or understandings between the parties relating to the product warranty.
Due to ongoing product development the actual product or products may vary from the illustrations or photos shown within this manual.
For Manuals, Replacement Parts or Customer Service visit:
This product is intended for residential, non-commercial use.
This product can expose you to lead, a chemical known to the state of
California to cause cancer, birth defects and/or other reproductive harm.
For more information go to www.p65warnings.ca.gov/product
MADE IN CHINA
©2020 J & J Global, LLC
J & J Global, LLC
Irving, TX 75038