REDRAGON M810 Taipan Pro Wired and Wireless Gaming Mouse Instruction Manual

REDRAGON M810 Taipan Pro Wired and Wireless Gaming Mouse Instruction Manual & troubleshooting

REDRAGON M810 Taipan Pro Wired and Wireless Gaming Mouse Instruction Manual  & troubleshooting 1

REDRAGON M810 Taipan Pro Wired and Wireless Gaming Mouse

REDRAGON M810 Taipan Pro Wired and Wireless Gaming Mouse Instruction Manual  & troubleshooting 2

Dear user
Thank you for you choosing REDRAGON Brand, to protect your rights and for better customer service, we ask that you note our warranty rules.

  1. Within the guaranty period, the repair is guaranteed for failure due to electrical circuit problems. Man-made damages, such as disassembly, hard impacts, submersion into the water, plugging into improper current or voltage, and damage caused by natural disasters such as fire, flood, or earthquakes are not included.
  2. Consumable parts (such as foot stick) and spare parts replacement are no included in our warranty.

OS support

Windows XP/Vista/Win7/Win8/Win 10

Button DescriptionREDRAGON M810 Taipan Pro Wired and Wireless Gaming Mouse Instruction Manual  & troubleshooting 3

  1. Left mouse button.
  2. Right mouse button.
  3. Scroll wheel and middle button.
  4. Fire button.
  5. Forward button.
  6. Backward button.
  7. DPI+ button (defaulted to speed up the cursor).
  8. DPI-button (defaulted to slow down the cursor).
  9. Power Switch: ECO(Power On without LED) /OFF(Power OFF)/ON(Power On withLED).
  10. Working Mode button (used to switch among the two working modes).

Basic Operation:

How to Connect the Mouse with a Computer Wired Connection

  1. Take out the USB to USB C cable in the package and connect the mouse with your computer.
  2. Slide the power switch on the bottom of the mouse to ON/ECO.
  3. The computer will recognize and configure the mouse automatically.
  4. The mouse will be ready for use when the configuration is finished. The LED of the
    LOGO and the lower edge will light on then if the power switch is placed to ON.
  5. The mouse is under recharging whatever the power switch is put to On /ECO. The scroll wheel will light up if the power switch is put to ON. And it does not light up if the power switch is put to ECO. It may take about four hours for the mouse to be fully recharged.

Wireless Connection

  1. Take out the USB receiver in the package and plug it into any available USB port on your computer.
  2. Slide the power switch on the bottom of the mouse to On or ECO.
  3. The computer will recognize and configure the keyboard automatically.
  4. The mouse will be ready for use when the configuration is finished. The LED of the LOGO and the lower edge will light on then if the power switch on the bottom of the mouse to ON.
  5. The mouse can work for about 8 hours with the LED backlight be OFF, and for about 2 hours with the LED backlight be ON. The scroll wheel light will flash when the battery is low.
  6. Recharge the keyboard when the battery is low.

How to Select DPI
The two buttons on the top of the mouse are set to DPI+/DPI – as default.

5 DP level with indicator
Press DPI+ and DPI- button can be switch the mouse DPI level among 500(Red)/ 1000(Blue)/2000(Green)/3000(Yellow)/ 1 000o(Purple), defaulted as 1000 DPI.

How to Switch the Working Mode
There are two working modes for the mouse. You can change the working mode with the mode button on the bottom of the mouse. when you press the mode button, the scroll wheel flashes in blue-violet four times slowly or quickly, and the polling rate of the mouse was set to 125Hz or 1000Hz correspondingly. The dpi value, backlight effects, and button functions can be set via software for each working mode.

Auto Sleep and Smart Shutdown
The mouse will sleep for eight minutes if there is no operation or when you shut down the computer or unplug the USB receiver. You can wake it up by clicking any mouse button except the DPl+ and DP- buttons.

Low Battery Indication
The scroll wheel light ill lashes in RED when the battery is low.

Backlight Effects (set via software)
LOGO Effects: Steady ON, Respiration, Neon, OFF.
LED Effects: Steady ON, Respiration, Streaming, OFF.

Storage for the Nano USB Receiver
The nano USB receiver can be stored in the storage slot on the bottom of the mouse.
Note: Slide the power switch on the bottom of the mouse to OFF for the long term.

How to Reconnect the Mouse the with the USB Receiver
The mouse may lose connection with the USB receiver for some oCcasional reasons such as a strong magnet, and violent vibration. So you may need to reconnect the mouse with the USB receiver. In this case, unplug the receiver and plug it back again. Slide the power switch on the bottom of the mouse to ON, press, and hold the Left, Middle, and Right buttons at the same time till the scroll wheel lights up and flashes in red. It will flash for about twenty seconds and then change back to the previous light effect. The reconnection will be completed and you can use the mouse then.

Software Instructions

Please download the software on www.redragonzone.com for this mouse. You can get more functions and settings after software installation.

  1. The DPI value can be set from 100 to 10000 DPI.
  2. Continuous keystroke function: Set the number of clicks and delay time.
  3. Backlight mode of the LOGO: Steady ON/OFF.
  4. Backlight mode of the side edge: Steady OFF.
  5. 10 of the mouse buttons can be remapped to various actions.
  6. Polling rate: 125Hz/250Hz/500Hz/1000Hz. As default, working mode 1 was set to 125Hz and working mode 2 was set to 1000Hz.
  7. For each of the two working modes, the mouse buttons can be set independently.
  8. Battery percentage indication: Battery percentage information is shown on the main interface of the software.

How to Recharge the Battery

When the battery is low, please recharge the battery in time.
Take out the USB to USB C cable and connect the mouse and any USB power output port. While the battery is under recharging, the scroll wheel lights up and flashes firstly in red (if the battery is very low), then in yellow, and finally lights steadily on in green when the battery is fully recharged. Meanwhile, the side edge light lights up and expands from back to front in red till the battery is fully recharged.
The battery can be recharged for more than 300 cycles times. And you can use the mouse while it is under recharging.

Note: Slide the power switch on the bottom of the mouse to OFF for long-term storage.
The battery can be recharged for more than 300 cycles times. And you can use the mouse while it is under recharging.

CAUTION: DO NOT CHARGE THE MOUSE BY WALL PLUG, INPUT VOLTAGE MAX 7V.

FAQ

  1. If the mouse is not responding, please check whether the mouse is plugged correctly in the corresponding computer’s USB port, or try another USB port.
  2. If the mouse is moving slowly, jumping or with delay, please try another surface. Dark, dirty, un-flat, bright surfaces may affect the performance of the mouse. A mouse pad is strongly recommended.

FCC Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference ina residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions

  1. this device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation.

California Proposition 65

WARNING: Risk of Cancer from [Name of one or more chemicals known to cause cancer] And Reproductive Harm From [Name of one or more chemicals known to cause reproductive toxicity] Exposure – www.P65Warnings.ca.gov.

FAQ


Setting up REDRAGON M810 Taipan Pro Wired and Wireless Gaming Mouse Instruction Manual is easy with these step-by-step instructions. Follow the steps are you are set-up in no time.

Using REDRAGON M810 Taipan Pro Wired and Wireless Gaming Mouse Instruction Manual is simple by using this manual. Follow the instructions one by one and everything will be fine

Is REDRAGON M810 Taipan Pro Wired and Wireless Gaming Mouse Instruction Manual stuck or not working properly? By resetting it you can set it back to the standard settings and everything should be back to normal. This works in many cases when problems arise.

This page contains the complete user instructions & manual for REDRAGON M810 Taipan Pro Wired and Wireless Gaming Mouse Instruction Manual

All symbols, colors and codes for REDRAGON M810 Taipan Pro Wired and Wireless Gaming Mouse Instruction Manual are explained in this instruction manual. You can find everything you need and moree