How to charge the power bank
Solar Panel Charger
Car ChargerWall Charger
Charging a laptop with DC cable – important note
- Choose the correct tip to fit the DC port of your laptop.
- Set the correct voltage on the power bank:
Keep a long press on the button until the display is flashing. Click button short to step between Voltage 12V/16.5V/20V/24V.
- Connect the laptop, the charge will start.
- After disconnecting the laptop, you need to set the Voltage next time.
For safety, it will always start the cycle at the lowest setting 12V.
NOTE: If you are in doubt about what DC-Voltage to choose, have a look at the label on the AC charger for the laptop.
Press short on the button to activate the power bank. First 5 seconds the blue status LED is shown, then one green LED comes on to indicate the wireless charger is ready. Turns blue when charging correctly.
Place the mobile phone on the surface.
There is a five-year warranty on your Sandberg product.
Please read the warranty terms and register your new Sandberg product at www.Sandberg.world/warranty
For information on handling electronic waste, see www.Sandberg.world/weee