Silmar ELECTRONICS IQ Panel 4 7 Inch Touchscreen Built with Built-In Camera Installation Guide

Silmar ELECTRONICS IQ Panel 4 7 Inch Touchscreen Built with Built-In Camera Installation Guide & troubleshooting

Silmar ELECTRONICS IQ Panel 4 7 Inch Touchscreen Built with Built-In Camera Installation Guide  & troubleshooting 1

Silmar ELECTRONICS IQ Panel 4 7 Inch Touchscreen Built with Built-In CameraSilmar ELECTRONICS IQ Panel 4 7 Inch Touchscreen Built with Built-In Camera Installation Guide  & troubleshooting 2

SPECIFICATIONS

Items Parameters IQ Panel 4
Platform Android OS Android 9
LCD Display Size 7” LCD
Resolution 1280 x 800 pixels
Brightness 300 cd/m2
RGB Color 24bit, 16.9 million colors
Processor 8 Core Qualcomm SnapDragon 8 Core SOM (System On a Module) with 16 GB of NAND Flash
Touchscreen Type Capacitive glass multi-touch
User Codes Up to 242 Role based (Dealer, Installer, Master, User, Guest, Duress)
Network WiFi Wi-Fi 802.11 a/b/g/n/ac dual band 2.4/5ghz – including built-in router capability
Cellular LTE CAT4 (Bands 2/25, 4/66, 5/26, 7, 12/17, 13, 14 (non-First Net)
Z-Wave Plus 700 Up to 137 Devices 137 total devices (80 lights, 20 Locks, 10 Thermostats, 21 Misc, 6 Garage Doors)
PowerG  

Up to 128 devices

915 MHz, long range, secure encrypted two-way wireless
Security RF Depending on the model; either S-Line encrypted 319.5MHz, 345MHz or 433MHz
Bluetooth Disarming, Audio Streaming Qualcomm Bluetooth Low Energy (BLE) 4.2
Flash Memory Internal Storage 16GB NAND Flash
Items Parameters IQ Panel 4
LED Indicator Status LED Green (Disarmed), Red (Armed), Triple full color RGB LED
Speakers/Siren 4w x 4 QuadSound 4x Front Facing 4watt speakers and 85dB siren
Camera Front Camera 8MP wide angle 120° field of view, fixed focus camera with FlexTilt adjustment
Microphone MEMs x 3 3 MEMs (micro electro mechanical system) Microphones with echo cancellation
Tamper Tamper Switch Dual Panel and wall tamper switch with spring release
Battery Type 18650 Lithium Ion 3000mAh. Ningbo Veken Battery Co., Ltd, Model VT27 or Icon Energy System Co. Ltd, Model IAN034NA
Buttons Hard Buttton Single wake/sleep button used for sleep/wake, hard reboot, and clean screen cancel
Mechanical Dimension 6.1”H x 7.5”W x 1”D (155mm x 191mm x 26mm)
Power Supply AC/DC External Plug-in Adapter Output: 7vDC 1000mA CC, Input 100-240VAC 50/60Hz. Adapter evaluated at 120vAC for UL/cUL
Mount Back Plate SmartMount wall mount included. SmartMount table stand or SmartMount IQ Base table stand with built-in subwoofer sold separately.
Certification UL/cUL/ULC UL/cUL Residential Fire and Burglary and UL/ULC Commercial Burglary Alarm Control Unit. Compliant with standards: UL985, UL1023, UL2610, ULC-S545, ULC-S304
FCC 2AAJXQS-IQP4 (may contain additional modules with separate FCC ID’s)
IC 11205A-QSIQP4
IFETEL ANCE Certificado No.: Reserved
Temperature Operational 0 to 49C, up to 93% relative humidity, indoor, dry ordinary locations use only
Storage -20 to 50C

SUPPORTED S-LINE SENSORS

Detector Type Model
IQ Door/Window-S QS1133-840UL, (UL Listed M/N: 60-362N-10-319.5), QS1135-840, QS1136-840, QS1137-840
IQ Motion-S QS1230-840UL, (UL Listed M/N: 60-639-95R), QS1231-840
IQ Glass-S QS1431-840UL, (UL Listed M/N: IQ Glass-S)
IQ Smoke QS5110-840UL
IQ CO QS5210-840UL
Keyfobs QS1331-840
Tilt Sensor QS1131-840
Flood Detector QS5536-840
Temperature Sensor QS5535-840
IQ Hardwire 16-F QS7133-840UL

NOTE: UL indicates that the device is certified to UL standards. These devices are not suitable for UL Commercial Burg applications.

SUPPORTED POWER-G SENSORS

Detector Type Model
Door/Window PG9945UL RF/CB , PG9307UL RB, PG9309, PG9312UL CB
Door/Window – Shock Sensor PG9935UL CB
Dual Tech (PIR+Microwave) Motion Detector PG9984(P)UL CB
Glassbreak Detector PG9922UL CB
Heat Detector PG9936HUL RF
Keyfobs PG9929, PG9939, PG9949, PG9938UL CB
Outdoor Motion Detector PG9902, PG9974(P), PG9994(P)UL CB
PIR Motion Detector PG9904(P), PG9914, PG9924, PG9862, PG9872UL CB
PIR Motion Detectors with Camera PG9934(P), PG9944UL CB
Sirens PG9901UL RF/RB, PG9911UL RF/RB
Smoke Detector PG9936UL RF
Wireless CO Detector PG9933UL RF
Wireless Repeater PG9920UL CB
Vanishing Door/Window Contact PG9303UL CB, PG9975UL RB
PowerG Wired to Wireless Converter (Supervisory window must be set to 200 sec when used with Fire and/or CO devices) PG9WLSHW8UL RFB CB

NOTE: Only the PowerG sensors marked with UL CB in the table above shall be used in UL/ULC Residential and Commercial Burg (UL2610/ULC-S304 Security Level I-II) listed installations. Devices marked with UL RB in the table above shall be used only in UL/ULC Residential Burg (UL1023/ULC-S304 Security Level I) listed installations. Devices marked with UL RF in the table above can be used in UL/ULC Residential Fire (UL985/ULC-S545) listed installations.

Conforms to UL Std. S985, 1023. & 2610 Certified to ULC Sub C1023 & ULC Std S545 Qolsys Inc. proprietary. Reproduction without permission is not permitted.

FAQ


Setting up Silmar ELECTRONICS IQ Panel 4 7 Inch Touchscreen Built with Built-In Camera Installation Guide is easy with these step-by-step instructions. Follow the steps are you are set-up in no time.

Using Silmar ELECTRONICS IQ Panel 4 7 Inch Touchscreen Built with Built-In Camera Installation Guide is simple by using this manual. Follow the instructions one by one and everything will be fine

Is Silmar ELECTRONICS IQ Panel 4 7 Inch Touchscreen Built with Built-In Camera Installation Guide stuck or not working properly? By resetting it you can set it back to the standard settings and everything should be back to normal. This works in many cases when problems arise.

This page contains the complete user instructions & manual for Silmar ELECTRONICS IQ Panel 4 7 Inch Touchscreen Built with Built-In Camera Installation Guide

All symbols, colors and codes for Silmar ELECTRONICS IQ Panel 4 7 Inch Touchscreen Built with Built-In Camera Installation Guide are explained in this instruction manual. You can find everything you need and moree