Please read this manual carefully before use and keep it in a safe place
Size: 60mm X 20mm X 26mm
Note: The machine is magnetic and can be adsorbed on metal.
|Power on||The camera shakes once after long-pressing the OK button, and the blue light is always on in standby mode.|
|Power off||The camera shakes twice after long-pressing the OK button, and the blue light flashes twice and then shut down.|
|Video mode||The camera shakes once after pressing the OK button in the power-on state, and the recording starts. The blue light flashed during the recording. Short press the OK button while recording, the camera shakes and the recording stops. Short press the OK button while recording, the camera shakes and the recording stops.
Then back to the recording standby state, the blue light is always on.
(When the blue and green lights are always on at the same time, the display is cyan).
|Turn on WiFi||The WiFi is turned off by default when you turn the camera on, and short press the OK button twice to turn it on. The green light flashes quickly when WiFi is not connected.
The green light is always on after connecting to WiFi. If you start recording after connecting to WiFi, the green light is always on, and the blue light continues to blink.
|Turn off WiFi||Quickly press the OK button twice, WiFi is off, and the green light is off.|
|Photo mode||The photo mode can only be used in the APP, switch to the photo mode from APR The indicator light is always red, and the red light flashes once per shot.
(The green light is always on when connecting to WIFI).
|Time-lapse mode||Time-lapse work inside APR The app switches to time-laps, the red and blue indicator lights are always on. The red and blue lights keep flashing when time-lapse until the time-lapse recording ends (as long as the WiFi is connected, the green light will always be on)|
|Low Power||When the battery power is too low, the camera will shake three times.
And the red light will flash quickly ten times then the camera shut down.
|Full Storage Card||When the card is full, the camera shakes for one time. After the blue light flashes quickly for 10 seconds, the camera will automatically shut down.|
|Charging indicator||The charging indicator light is an independent light. It is on the small hole next to the cardholder. When charging, it is always on, charge full will off.|
|No card or card error||If no card is inserted or the card error, the red light flashes quickly, and the device will vibrate every two seconds. 10 mins later, the device will shut down auto ( the blue light is always on after connecting to pc cam)|
|Car Mode||The car model works inside the App, and the video will auto-start loop recording when connect with the car lighter. Unplugging the charger, the video will auto-saved, camera turn offer after 10 seconds. When setting Card mode inside the App, next time when power on the camera, it will be car mode still. If not connected with a car lighter, when powered on, it will work like a normal camera, with no auto recording.|
|Webcam||Unplug the camera’s memory card, and plug it into the USB to connect to the computer when it is turned off. The camera will automatically turn on, and the blue light is always on. No need to install the driver, plug and play (note: the computer with a camera needs to manually select the camera name, the name is C100/C100+, different systems may vary)|
|Red light (Abnormal indicator)||Greenlight (Wifi indicator)||Blue light (Work indicator)||Charging indicator (Red)|
|Lights off||Lights off||Long light||Lights off|
|Lights off||Lights off||2 Flashes||Lights off|
|Lights off||Light is on when turning off / on WiFi||Flashing /Long light||Lights off|
|Lights off||Flashes rapidly / Long light||Flashing||Lights off|
|Lights off||Lights off||Lights off||Lights off|
|Long light/blinking once when taking photos||Light is on when turning off / on WiFi||Lights off||Lights off|
|Standby long light / time-lapse video red
light and blue lights flash alternately
|Light is on when turning off / on WiFi||Standby long light / time-lapse video red
light and blue lights flash alternately
|Flashes rapidly||Light is on when turning off / on WiFi||Lights off||Lights off|
|Lights off||Light is on when turning off / on WiFi||Flashes quickly for 10 seconds||Lights off|
|Lights off||Lights off||Lights off||Long light/Fully off|
|Flashes rapidly||Lights off||Lights off||Lights off|
|Lights off||Lights off||Flashing||Lights off|
|Lights off||Lights off||Long light||Lights off|
|Chipset||Novatek 96672||Novatek 96675|
|Video Resolution||1080P(1920*1080)30FPS 720P(1280*720)30/60FPS VGA(640*480)30F PS||4K(3£340*2160)30FPS 4:3 2K(2560*1440)30FPS 1080P(1920*1080)60/30FPS 720P(1280*720)120/60FPS|
|Photo Resolution||15M(5200*2928) 12M(4640*2608) 10M(4320*2432) 8M(3840*2160) 5M(3200*1808) 3M(2560*1440) 1M(1440*816)||15M(5200*2928) 12M(4640*2608) 10M(4320*2432) 8M(3840*2160) 5M(3200*1808) 3M(2560*1440) 1M(1440*816)|
|Video Mode||Normal Mode, Time-lapse Mode, Car Mode||Normal Mode, Time-lapse Mode, Car Mode, Vertical Screen mode|
|Photo||Normal Mode, Burst Mode||Normal Mode, Burst Mode|
|Working Time||1080P/30FPS WiFi OFF, Video for 3 hours 20 mins 1080P/30FPS WiFi On, Video for 2 hours 10 mins||21Q30FPS Video for 2 hours 30 mins 1080P/30FPS WiFi OFF, Video for 3 hours 1080P/30FPS WiFi On, Video for 1 hour 50 mins|
WI-Fl Connect camera
Scan and download the APP
This product can be connected to smartphones and laptops (Android or 10S), please follow the operating steps, below:
- Install the mobile phone software “SJCAM Zone” to your smartphone or laptop. Android device system download is available on Google Play. Mainland China users can download it on Application treasure, and iPhone devices can download it on App Store.
- Long press to turn on the camera, After that, press the button twice consecutive to turn on the WIFI
- Turn on wifi on the mobile device, search and connect to wifi “C100+ _ XXXXX” / “C100 _ XXXXX” with an initial password:12345678.
- After successfully connecting to wifi, open the SJCAM APP, then click the “connect camera” button.
- After successfully connecting to SJCAM APP, you can operate the camera according to the following function tips:1. Display camera power
2. Click to turn off the camera
3. Click to enter the media library
4. Click to quick settings
5. Click to start recording
6. Click to switch to camera mode
7. Slide left and right to switch camera mode
8. Click to enter camera parameter settings
9. Note: Only C100+ camera models have Vertical Screen mode
- Parameter Setting interface: The resolution, recording of the action camera can be set on this page
- Media storage interface: At this interface, Sharing, video clipping, downloading, deleting, and selecting all pictures or videos can be chosen.
*This page is the basic warranty certificate, please fill it in carefully and keep it properly.
|Cause of issue|
SJCAM products mounts and accessories come with one (1) year warranty from the purchase date. SJCAM’s sole obligation in the event of such defects during this period is to repair or replace the item with a comparable model at SJCAM’s sole discretion.
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
Made by Shenzhen ZhenCheng Technology Co., Ltd.
3/F Building C, NO.2 Road 1, Shangxue Industrial Area Bantian, Longgang District, Shenzhen, China
Telephone: + 86-18118714563 Official
Made in China