STARLINK Router Installation Guide

STARLINK Router Installation Guide & troubleshooting

STARLINK Router Installation Guide  & troubleshooting 1

STARLINK RouterSTARLINK Router Installation Guide  & troubleshooting 2

SETUP

Plug everything in
Power up the router by connecting the power cord and dish cable through the bottom ports of the Router. When everything is connected correctly, the Router LED will glow a pulsing white.STARLINK Router Installation Guide  & troubleshooting 3

Power Supply LED:
When the Router is powered, the LED glows solid white

Router LED:

  • Pulsing White: Initializing
  • Solid White: Waiting for the Internet
  • Solid Blue: Connected to the Internet

CONNECT

Once the Router LED is solid white and no longer pulsing, the software is initialized and the Router is ready for login. This takes approximately 2 minutes. Connect using the Network ID and password. Once the system has successfully established an internet connection, the Router LED will glow blue, and you will be able to browse the web.STARLINK Router Installation Guide  & troubleshooting 4

Changing Your Network ID Or Password

To access the Router Admin Portal on a connected device (e.g., phone, tablet, PC) via the Starlink GUI, open the Starlink App, or enter http://192.168.100.1/ in your Internet Browser. STARLINK GUI => SETTINGS Once in SETTINGS, change the IWFI CONFIGURATION.STARLINK Router Installation Guide  & troubleshooting 5

Regulatory information
For regulatory identification purposes, your product is assigned Model No.: UTR-201,
FCC ID: 2AWHPR201, IC: 26207-UTR201

E-Label Access
To view the electronic regulatory labels on the connected device (e.g., phone, tablet, PC) via Starlink GUI Open Starlink App, or http://192.168.100.1/ in Web Browser. Starting from main page of STARLINK GUI

  • Step 1 – Access the submenu “Support”
  • Step 2 – Access the submenu “Legal”
  • Step 3 – Access the submenu “Regulatory Label” Alternatively, the regulatory markings might be located on the bottom of the unit, on the packaging, or elsewhere in this document.

Federal Communications Commission Notice
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1.  This device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

  •  Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  •  Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance 23 cm between the radiator & your body.

industry Canada statement:
This device complies with ISED’s license-exempt RSS. Operation is subject to the following two conditions:  This device may not cause harmful interference, and  this device must accept any interference received, including interference that may cause undesired operation.

Caution :
 the device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to cochannel mobile satellite systems;

Radiation Exposure Statement:
This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with greater than 28cm between the radiator & your body.

FAQ


Setting up STARLINK Router Installation Guide is easy with these step-by-step instructions. Follow the steps are you are set-up in no time.

Using STARLINK Router Installation Guide is simple by using this manual. Follow the instructions one by one and everything will be fine

Is STARLINK Router Installation Guide stuck or not working properly? By resetting it you can set it back to the standard settings and everything should be back to normal. This works in many cases when problems arise.

This page contains the complete user instructions & manual for STARLINK Router Installation Guide

All symbols, colors and codes for STARLINK Router Installation Guide are explained in this instruction manual. You can find everything you need and moree