StarTech ST12MHDLNV HDMI Over IP Extender User Guide

StarTech ST12MHDLNV HDMI Over IP Extender User Guide & troubleshooting

StarTech ST12MHDLNV HDMI Over IP Extender

StarTech ST12MHDLNV HDMI Over IP Extender User Guide  & troubleshooting 1Actual product may vary from photos
SKU#: ST12MHDLNV

For the latest information and specifications visit www.startech.com/ST12MHDLNV Manual Revision: 06/12/2020

Compliance Statements

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna
  • Increase the separation between the equipment and receiver
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
  • Consult the dealer or an experienced radio/TV technician for help
Industry Canada Statement

This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.
CAN ICES-3 (B)/NMB-3(B)

Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols

This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-party companies not related in any way to StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which this manual applies by the third-party company in question. Regardless of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby acknowledges that all trademarks, registered trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the property of their respective holders.

To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support

Safety Statements

Safety Measures
  • Wiring terminations should not be made with the product and/or electric lines under power.
  • Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.

Product Diagram

Transmitter

StarTech ST12MHDLNV HDMI Over IP Extender User Guide  & troubleshooting 2

1

12V DC Port

2

HDMI In

3

HDMI Out

4

RJ45 Port

5

IR Out Port
Receiver

StarTech ST12MHDLNV HDMI Over IP Extender User Guide  & troubleshooting 3

1

12V DC Port

2

HDMI Out

3

IR In Port

4

RJ45 Port (x2)

Product Information

Package Contents
  • HDMI over IP Transmitter x 1
  • HDMI over IP Receiver x 1
  • Power Adapter (NA, UK, EU and AU clips) x 2
  • IR Blaster x 1
  • IR Receiver x 1
  • Mounting Screws x 4
  • Rubber Feet x 8
  • User Manual x 1
Requirements

Display

  • HDMI Display Device x 1
  • (Optional) HDMI Display Device x 1

Video Source Device

  • Video S ource (e.g. Host Computer, Media Player) x 1

Cables

  • CAT5e/6 Cable x 1
  • HDMI Cables x 3

Optional

  • Network Device (e.g. Switch) x 1
  • IR Remote Control x 1

Tools

  • Phillips  Head Screwdriver x 1

Connecting the Extender

StarTech ST12MHDLNV HDMI Over IP Extender User Guide  & troubleshooting 4

Point to Point

Connecting the HDMI Transmitter

  1. Place the HDMI Transmitter near the Video Source Device.
  2. Connect an HDMI Cable (sold separately) to the HDMI In Port on the HDMI Transmitter and the other end to an HDMI port on the Video Source Device (e.g. host computer).
  3. Connect an HDMI Cable to the HDMI Out Port on the HDMI Transmitter and the other end to an HDMI Port on the Display Device (e.g. Monitor).

Connecting the HDMI Receiver

  1. Place the HDMI Receiver near the Display Device.
  2. Connect an HDMI Cable to the HDMI Out Port on the HDMI Receiver and the other end to an HDMI port on the Display Device (e.g. monitor).
  3. Connect an Cat5e/Cat6 Cable to the RJ45 Port on the HDMI Receiver and the other end to an RJ45 Port on a HDMI Transmitter.

Powering the Extender

  • Connect the Power Adapters to the 12V DC Port on both the HDMI Transmitter and the HDMI Receiver and the other ends to AC Electrical Outlets.
One Transmitter to Multiple Connections (Network Method)

StarTech ST12MHDLNV HDMI Over IP Extender User Guide  & troubleshooting 5

In order to use this configuration, an existing IP network, Network Switch (sold separately), and multiple HDMI Receivers (sold separately) are required.

Notes: A minimum of 100Mbps of bandwidth is required per Receiver (e.g. 100Mbps is needed for one transmitter and one receiver).
Each Ethernet connection in the setup needs to be at least 100Mbps. Only one transmitter can be connected to a network at a time.
A DHCP Server is required to be connected to the network in order to automatically assign an IP Address to the Extender.

Connecting the HDMI Transmitter

  1. Place the HDMI Transmitter near the Video Source Device.
  2. Connect an HDMI Cable (sold separately) to the HDMI In Port on the HDMI Transmitter and the other end to an HDMI port on the Video Source Device (e.g. host computer).
  3. (Optional) Connect an HDMI Cable to the HDMI Out Port on the HDMI Transmitter and the other end to an HDMI port on a Display Device (e.g. monitor).
  4. Connect an Cat5e/Cat6 Cable to the RJ45 Port on the HDMI Transmitter and the other end to an RJ45 Port on a Network Device (e.g. Switch).

Connecting the HDMI Receiver

  1. Place the HDMI Receiver near the Display Device.
  2. Connect an HDMI Cable to the HDMI Out Port on the HDMI Receiver and the other end to an HDMI port on the Display Device (e.g. monitor).
  3. Connect a CAT5e/6 Cable to the RJ45 Port on the HDMI Receiver and the other end to an RJ45 Port on a Network Device (e.g. Switch).
  4. Connect additional HDMI Receivers as desired.

Powering the Extender

  • Connect the Power Adapters to the 12V DC Port on both of the HDMI Transmitter and the HDMI Receiver and the other ends to AC Electrical Outlets.
One Transmitter to Multiple Connections (Cascading Method – Maximum of 3 HDMI Receivers)

StarTech ST12MHDLNV HDMI Over IP Extender User Guide  & troubleshooting 6

Cascade Connection In order to use this configuration multiple HDMI Receivers (sold separately) are required.

Connecting the HDMI Transmitter

  1. Place the HDMI Transmitter near the Video Source Device.
    Connect an HDMI Cable (sold separately) to the HDMI In Port on the HDMI Transmitter and the other end to an HDMI port on the Video Source Device (e.g. host computer).
  2. (Optional) Connect an HDMI Cable to the HDMI Out Port on the HDMI Transmitter and the other end to an HDMI port on the Display Device (e.g. monitor). 3. Connect a CAT5e/6 Cable to the RJ45 Port on the HDMI Transmitter and the other end to an RJ45 Port on a HDMI Receiver.

Connecting the HDMI Receiver

  1. Place the HDMI Receiver near the Display Device.
  2. Connect an HDMI Cable to the HDMI Out Port on the HDMI Receiver and the other end to an HDMI Port on the Display Device (e.g. monitor).
  3. Connect a CAT5e/6 Cable to the RJ45 Port on the HDMI Receiver and the other end to an RJ45 Port on the HDMI Transmitter.
  4. Connect a CAT5e/6 Cable to the RJ45 Port on the connected HDMI Receiver and the other an to the RJ45 Port on a second HDMI Receiver.
  5. Repeat step 4 to connect additional HDMI Receivers.

Powering the Extender

  • Connect the Power Adapters to the 12V DC Port on the HDMI Transmitter and the HDMI Receivers and the other ends of the Power Adapters to AC Electrical Outlets.

(Optional) Installing the IR Receiver and Blaster

The IR Receiver and IR Blaster can be connected to allow you to use an IR Remote. HDMI Transmitter:

  1. Connect the IR Blaster to the IR Out Port on the HDMI Transmitter.
  2. Position the IR Blaster directly in front of the Video Source Device’s IR Sensor (if you are unsure, check the manual of the video source device to determine the IR sensor location).

HDMI Receiver:

  1. Connect the IR Receiver to the IR In Port on the HDMI Receiver.
  2. Position the IR Receiver’s Sensor in the location where you will point the IR Remote Control.

(Optional) Mounting the Extender

Notes: StarTech.com is not responsible for any damages related to the installation of this product.
Prior to mounting, please test the product’s port compatibility with all devices intended for use with this product.
Before mounting the HDMI Transmitter and/or HDMI Receiver make sure that the surface you are mounting to is strong enough to support the weight of the HDMI Transmitter and HDMI Receiver. It is recommended that you mount the HDMI Transmitter and/or HDMI Receiver into a wall stud to provide the correct support.

  1. Measure the distance between the Mounting Screw Holes on the Mounting Brackets.
  2. Using a Level and a Writing Utensil, mark the distance measured between the two Mounting Screw Holes on the mounting surface.
  3. Using a Phillips Head Screwdriver, screw the two Mounting Screws into the surface, using the Mounting Screw Hole locations marked in step 2 as a guide. Make sure that you leave space between the head of the screw and the wall.
  4. Align the large holes on the Mounting Brackets with the Mounting Screws.
  5. Slide the HDMI Transmitter and/or HDMI Receiver down, to lock the Mounting Brackets in place.

Changing the Power Adapter Clips

  1. On the front side of the Power Adapter slide the release button downward, releasing the Power Adapter Clip.
  2. Pull the Power Adapter Clip away from the Power Adapter. Align another Power Adapter Clip with the Prongs on the Power Adapter.
  3. Gently push the Power Adapter Clip over-top of the Prongs. The Power Adapter Clip will click into place.

Video Resolution Performance

The video resolution performance of this extender will vary depending on the quality of your network cabling. For best results, StarTech.com recommends using a shielded CAT6 cable.

Distance Maximum Resolution
150 m (492 ft.) or less 1080p at 60Hz

LED Indicators

LED Function
Power Solid Red: Indicates that the HDMI Transmitter and HDMI Receiver are receiving power.

Warranty Information

This product is backed by a two-year warranty. For further information on product warranty terms and conditions, please refer to www.startech.com/warranty.

Limitation of Liability

In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their officers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of profits, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product.

Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations or exclusions contained in this statement may not apply to you.

Hard-to-find made easy. At StarTech.com, that isn’t a slogan. It’s a promise.

StarTech.com is your one-stop source for every connectivity part you need. From the latest technology to legacy products — and all the parts that bridge the old and new — we can help you find the parts that connect your solutions.

We make it easy to locate the parts, and we quickly deliver them wherever they need to go. Just talk to one of our tech advisors or visit our website. You’ll be connected to the products you need in no time.

StarTech.com is an ISO 9001 Registered manufacturer of connectivity and technology parts. StarTech.com was founded in 1985 and has operations in the United States, Canada, the United Kingdom and Taiwan servicing a worldwide market.

Reviews

Share your experiences using StarTech.com products, including product applications and setup, what you love about the products, and areas for improvement.

StarTech.com Ltd.
45 Artisans Cres. London, Ontario N5V 5E9
Canada

StarTech.com LLP
2500 Creekside Pkwy. Lockbourne, Ohio 43137
U.S.A.

StarTech.com Ltd.
Unit B, Pinnacle 15 Gowerton Rd., Brackmills Northampton NN4 7BW
United Kingdom

FR: startech.com/fr
DE: startech.com/de
ES: startech.com/es
NL: startech.com/nl
IT: startech.com/it
JP: startech.com/jp

To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support

FAQ


Setting up StarTech ST12MHDLNV HDMI Over IP Extender User Guide is easy with these step-by-step instructions. Follow the steps are you are set-up in no time.

Using StarTech ST12MHDLNV HDMI Over IP Extender User Guide is simple by using this manual. Follow the instructions one by one and everything will be fine

Is StarTech ST12MHDLNV HDMI Over IP Extender User Guide stuck or not working properly? By resetting it you can set it back to the standard settings and everything should be back to normal. This works in many cases when problems arise.

This page contains the complete user instructions & manual for StarTech ST12MHDLNV HDMI Over IP Extender User Guide

All symbols, colors and codes for StarTech ST12MHDLNV HDMI Over IP Extender User Guide are explained in this instruction manual. You can find everything you need and moree