SYNCO P1L Microphone User Manual

SYNCO P1L Microphone User Manual & troubleshooting

SYNCO P1L Microphone User Manual  & troubleshooting 1

SYNCO P1L Microphone User Manual  & troubleshooting 2

Microphone P1L User Manual
Thank you for choosing the SYNCO product.
Please read this manual carefully before use and follow all instructions mentioned herein.

Caring For Your SYNCO Product

  • Please keep the product in a dry, clean, dust-free environment.
  • Keep corrosive chemicals, liquids, and heat sources away from the product to prevent mechanical damage.
  • Use only a soft and dry cloth for cleaning the product.
  • Malfunction may be caused by dropping, the impact of external force.
  • Do not attempt to disassemble the product. Doing so voids the warranty.
  • Please have the product checked or repaired by authorized technicians if any malfunctions happen.
  • Failure to follow all the instructions may result in mechanical damage.
  • Warranty does not apply to human errors.

Package ListSYNCO P1L Microphone User Manual  & troubleshooting 3Product Instruction

TX Transmitter

SYNCO P1L Microphone User Manual  & troubleshooting 4 ① Power
② Working Indicators
③ Built-in Mic
④ Contacts
⑤ Pocket Clip

RX Receiver

SYNCO P1L Microphone User Manual  & troubleshooting 5 ① Vocal Effects
② Type-C Port
③ Working Indicators
④ Connector
⑤ Contacts

Wireless Charging Case

SYNCO P1L Microphone User Manual  & troubleshooting 6 ① Pairing/ Power Prompt
② Type-C Port
③ Working Indicators
④ Contacts

Indicator — Transmitter (Double press the Power button to turn off light effect)

Working Indicators (White Light)

Flash concurrently

SYNCO P1L Microphone User Manual  & troubleshooting 7

System unpaired
Single light flashes

SYNCO P1L Microphone User Manual  & troubleshooting 8

Low battery
Illuminate sequentially (Light effect on)

SYNCO P1L Microphone User Manual  & troubleshooting 9

System paired, normal working
Single light keeps on (Light effect off)

SYNCO P1L Microphone User Manual  & troubleshooting 10

System paired, normal working
Working Indicators (Red Light)
Single light keeps on (In this case)

SYNCO P1L Microphone User Manual  & troubleshooting 11

Charging, and then turns off when fully charged

Indicator — Receiver

Working Indicators (White Light)

Flash concurrently

SYNCO P1L Microphone User Manual  & troubleshooting 12

System unpaired
Illuminate sequentially

SYNCO P1L Microphone User Manual  & troubleshooting 13

System paired
Single light keeps on & Illuminate  sequentially

SYNCO P1L Microphone User Manual  & troubleshooting 14

Original sound
Single light flashes twice & Illuminate  sequentially

SYNCO P1L Microphone User Manual  & troubleshooting 15

Vocal effects on

Indicator — Wireless Charging Case

Working Indicators (White Light)
Illuminate sequentially

SYNCO P1L Microphone User Manual  & troubleshooting 16

Pairing

Operations

1. UsageSYNCO P1L Microphone User Manual  & troubleshooting 17

  1. Tap on the right side of the charging case to pop out the drawer
  2. Take the TX and RX out
  3. TX should boot automatically as it left the case, and switch itself off automatically when returning to the case.
    (Forcible switch: Long press the Power button on TX for 3 seconds)
  4. RX should boot automatically as it is plugged into a smartphone

2. Manual PairingSYNCO P1L Microphone User Manual  & troubleshooting 18

  1. Place the TX and RX in the case with their contacts are connected with the case’s
  2. Long press the Pairing button on the case for 3 seconds with the drawer open
  3. The indicators on the TX and RX should light up and illuminate sequentially when pairing is successful
    Note: The transmitter will automatically switch off if it is unpaired or disconnected for 5 minutes.
    3. Charging
    Charge the TX:
    Place the TX in the case with contacts connected with the cases.
    Charge the case: Connect the case with the power supply via the charging cable.
    4. Check the power
    TX:
    Short press the Power button, the indicators will light up according to remain power for 5 seconds Charging Case: Short press the Power Prompt button, the indicators  will light up according to remain power for 5 seconds
    5. Use vocal effects
    Short press the Vocal Effects button on the receiver to switch sound effects:
    Original >> Studio FX >> KTV FX >> Voice Amplification >> EDM (Electronic Dance Music) >> Baby FX >> Male to Female >> Female to Male >> Monster FX. Default effect: Original
    6. Charging phone device
    Plug your phone charging cable into the Type-C Port on the receiver.
    7. In-Ear monitoring
    Plug the included Type-C to 3.5mm Adapter into the Type-C Port on the receiver. Then plug in your headphones to real-time monitor mic recording and device’s backgrounding.
    Note: The included Type-C to 3.5mm Adapter is exclusive, not available for other devices.

Specifications

TX Transmitter

Wireless Transmission Digital 2.4GHz
RF Frequency Band 2400-2483.5MHz
Frequency Response 20Hz-20KHz
Working Distance 492ft/150m(LOS area); 164ft/50m(NLOS area)
Sampling Rate 48KHz
Bit Depth 16Bit
Sensitivity -26dB
SNR >75dB
RF Output Power 10dB
Battery Type Built-in Lithium Battery, 120mAh
Battery Charging Time 1.5H
Battery Life 5H
Dimensions 49x19x19 (mm)
Material ABS
Weight 10g

RX Receiver

Wireless Transmission Digital 2.4GHz
RF Frequency Band 2400-2483.5MHz
Working Distance 492ft/150m(LOS area); 164ft/50m(NLOS area)
Sampling Rate 48KHz
Bit Depth 16Bit
Antenna Built-in
Monitoring 3.5mm In-Ear Monitoring
Connector Lightning Output
Power Input Type-C
Dimensions 49x30x9 (mm)
Material ABS
Weight 5g

Wireless Charging Case

Battery Type Built-in Lithium Battery, 300mAh
Battery Charging Time 1.5H
Charging Port Type-C Port
Power Requirements 5V 2A
Dimensions 70x43x37 (mm)
Weight 58g

Warranty

Warranty Period
Thank you for purchasing SYNCO products.

  1. Customers are entitled to free replacement or repair service in case of the quality defect(s) found in the product under normal use within 30 days upon receipt of the product.
  2. Original SYNCO products are entitled to 12-month limited warranty service. The warranty period begins on the date of purchase of brand new, unused products by the first end-user. Within the warranty period, if a product defect or failure is attributable to material defection or technological problem, the defective product or defective part will be repaired or replaced without charge (service and materials fee).

Warranty Exclusions and Limitations

Faults resulted from inappropriate use of a product without following its operation specification

  • Artificial damage, e.g. crash, squeeze, scratch, or soaking
  • Modifications to a product by its user or a third party without the prior written consent of SYNCO, e.g. replacement of element or circuit, label alteration
  • The code on the product is inconsistent with that of the warranty certificate, or the code on the product or warranty certificate is altered or torn off
  • All consumable accessories attached to a product, like a cable, wind muff, battery
  • Faults as a result of force majeure, such as fire, flood, lightning, etc.

Warranty Claim Procedure

  • If failure or any problem occurs to your product after purchase, please contact a local agent for assistance, or you can always contact SYNCO’s customer service through email at [email protected].
  • Please retain your sales receipt and warranty certificate as proof of purchase. If any of these documents are missing, only sales return or chargeable service will be provided.
  • If the SYNCO product is out of warranty coverage, the service and the cost of the parts will be charged.

WARRANTY CERTIFICATE

Please register your warranty. Meanwhile, you are welcome to contact us via Email:[email protected]
USER INFORMATION Customer Name:
Phone Number:
Email:
Address:
SALES INFORMATION Sales Date:
Model:
Product Code:
Dealer:
REPAIR RECORD Service Date:
Technician:
Issue:
RESULT Solved   Unsolved Returned(Replaced)

Guangzhou Zhiying Technology Co., Ltd

SYNCO P1L Microphone User Manual  & troubleshooting 19

SYNCO P1L Microphone User Manual  & troubleshooting 20Block 15th, No.200 Fangcun Avenue East,
Liwan District, Guangzhou, China, 510000
SYNCO P1L Microphone User Manual  & troubleshooting 21 [email protected]
SYNCO P1L Microphone User Manual  & troubleshooting 22www.syncoaudio.com
SYNCO P1L Microphone User Manual  & troubleshooting 23https://www.facebook.com/syncomicrophones

FAQ


Setting up SYNCO P1L Microphone User Manual is easy with these step-by-step instructions. Follow the steps are you are set-up in no time.

Using SYNCO P1L Microphone User Manual is simple by using this manual. Follow the instructions one by one and everything will be fine

Is SYNCO P1L Microphone User Manual stuck or not working properly? By resetting it you can set it back to the standard settings and everything should be back to normal. This works in many cases when problems arise.

This page contains the complete user instructions & manual for SYNCO P1L Microphone User Manual

All symbols, colors and codes for SYNCO P1L Microphone User Manual are explained in this instruction manual. You can find everything you need and moree