SYSTEM Q VDP300 Phone SEE Wi-Fi Door Knox Box User Guide

SYSTEM Q VDP300 Phone SEE Wi-Fi Door Knox Box

The VDP300 PhoneSEE WiFi DoorKnox box is used to integrate DoorKnox cameras and monitors for remote viewing and door relay control via the “Tuya Smart” application.

Connections

The VDP300 is installed between DoorKnox cameras and DoorKnox monitors to intercept the images to stream and connect with the Tuya Smart app via the WiFi or via a Ethernet network cable connected to a router. Ensure the VDP300 is setup close to the router or access point for best WiFi performance

Power the VDP300 from 12V DC (via the PSU provided)

Mounting

The VDP300 Hub can be mounted using the screws provided and the mounting holes on the rear.

Tuya App

• Download “Tuya Smart” app via the Apple store or Google Play store.
• 2. Open the app and register an account.

EZ Mode (WiFi Setup)

• Press the S-link to start the EZ pairing. The WiFi LED will flash slowly when in pairing mode
• Open the “Tuya Smart” app, select “Add Device” or press the “+” at the top right to add a device
• Select “Video Surveillance” category on the left, then select “Smart Doorbell”
• At the top right, select “EZ Mode”
• Tick “Next Step”, then select Next
• Select the WiFi Hub (Router or Access point) and enter the WiFi password, then select Next 
• The WiFi LED will flash quickly once it starts pairing
• Once paired the app will show the device is Added

All specifications are approximate. System Q Ltd reserves the right to change product specifications or features without notice. Whilst every effort is made to ensure that these instructions are complete and accurate, System Q Ltd cannot be held responsible for any losses, no matter how they arise, from errors or omissions in these instructions, or the performance or non-performance of the equipment refered to  www.systemq.com/PDF/manual/xVDP300.pdf