Tacx Boost Bundle Owner’s Manual

Tacx Boost Bundle Owner’s Manual & troubleshooting

Tacx Boost Bundle Owner’s Manual  & troubleshooting 1

Tacx Boost Bundle

Tacx Boost Bundle Owner’s Manual  & troubleshooting 2

GETTING STARTED

What is virtual power?Tacx Boost Bundle Owner’s Manual  & troubleshooting 3The app estimates your power based on the speed readings it gets from the sensor and the resistance position of the resistance lever on your handlebars. This estimation is based on the trainers power curve. The power curve chart (below) shows you the power (watts) required to achieve a given speed at each resistance setting and is unique for each basic trainer model.
So, virtual power is an estimation of your actual power based on your speed and not a precise measurement.

What are my training options?

Tacx Boost Bundle Owner’s Manual  & troubleshooting 4

Virtual power allows you to:

  • Ride Tacx Films in the Tacx Training app.
  • Ride a GPS track in the Tacx Training app.
  • Ride with the Zwift app.
  • Ride with the TrainerRoad app.
  • Keep track of your speed and estimated power. Cadence data requires an optional cadence sensor.

When using the Tacx or Zwift app, it’s best to keep the resistance lever on position 2 so the resistance will not change.

Instructions

  1. Mount the speed sensor on the rear wheel hub according to the sensor’s manual.
  2. Open the app you wish to use.
  3. Pair the speed sensor in the app.
  4. Select your wheel diameter.
  5. Select the Tacx Boost as trainer.
  6. The sensor is connected.
  7. When using the Tacx app or Zwift app, set the resistance lever on your handlebar to position 2.

ASSEMBLY

  1. Check the package contents.Tacx Boost Bundle Owner’s Manual  & troubleshooting 5
  2. Unfold the frame and place on a firm, level surface.Tacx Boost Bundle Owner’s Manual  & troubleshooting 6
  3. Measure the wheel diameter, including the tire.Tacx Boost Bundle Owner’s Manual  & troubleshooting 7
  4. Determine the position of the resistance unit.Tacx Boost Bundle Owner’s Manual  & troubleshooting 8
  5. Use a 5 mm allen key to mount part A and the resistance unit on to the frame.Tacx Boost Bundle Owner’s Manual  & troubleshooting 9
  6. Install the included quick release skewer and inflate the tire to 8 bar.Tacx Boost Bundle Owner’s Manual  & troubleshooting 10
  7. Place the bike in the trainer, push down the lever and rotate the knob clockwise until the roller slightly touches the rear wheel.Tacx Boost Bundle Owner’s Manual  & troubleshooting 11
  8. Pull up the lever to release the rear wheel and rotate the knob 360o clockwise for 5 times for an optimal performance in the Tacx app. Then push down the lever.
  9. Tacx Boost Bundle Owner’s Manual  & troubleshooting 12Measure the diameter of your handlebars and place the proper insert in the resistance lever.Tacx Boost Bundle Owner’s Manual  & troubleshooting 13
  10. Place the resistance lever on your handlebars and tighten it by turning the knob.Tacx Boost Bundle Owner’s Manual  & troubleshooting 14

Tacx Boost Bundle Owner’s Manual  & troubleshooting 15

References

FAQ


Setting up Tacx Boost Bundle Owner’s Manual is easy with these step-by-step instructions. Follow the steps are you are set-up in no time.

Using Tacx Boost Bundle Owner’s Manual is simple by using this manual. Follow the instructions one by one and everything will be fine

Is Tacx Boost Bundle Owner’s Manual stuck or not working properly? By resetting it you can set it back to the standard settings and everything should be back to normal. This works in many cases when problems arise.

This page contains the complete user instructions & manual for Tacx Boost Bundle Owner’s Manual

All symbols, colors and codes for Tacx Boost Bundle Owner’s Manual are explained in this instruction manual. You can find everything you need and moree