TELTONIKA FMB010 Easy OBDII Tracker User Manual

TELTONIKA FMB010 Easy OBDII Tracker User Manual & troubleshooting

TELTONIKA FMB010 Easy OBDII Tracker User Manual  & troubleshooting 1

FMB010
Easy OBDII tracker
Quick Manual
v1.3

Know your device

TELTONIKA FMB010 Easy OBDII Tracker User Manual  & troubleshooting 2

Figure 1 FMB010 device view

Pinout

Table 1 OBDII pinout

PIN NUMBER PIN NAME  DESCRIPTION 
1 DIN1 Ignition input
2 PWM_BUS+/VPW
4 GND (-) Ground
5 GND (-) Ground
10 PWM_BUS-
16 VCC (10 – 30)V DC(+) Power supply (+10-30 V DC)

TELTONIKA FMB010 Easy OBDII Tracker User Manual  & troubleshooting 3

Figure 2 FMB010 OBDII socket pinout

Set up your device

How to insert Micro-SIM card and connect the battery
  1. Gently remove FMB010 cover using plastic pry tool from both sides.
  2. Insert Micro-SIM card as shown with PIN request disabled or read our Wiki how to enter it later in Teltonika Configurator. Make sure that Micro-SIM card cut-off corner is pointing forward to slot.
  3. Connect battery as shown to device. Position the battery in place where it does not obstruct other components.
  4.  Attach device cover back.
    Device is ready to be connected.
    TELTONIKA FMB010 Easy OBDII Tracker User Manual  & troubleshooting 4
PC Connection (Windows)
  1. Power-up FMB010 with DC voltage (10 ­ 30 V) power supply using supplied power cable. LED’s should start blinking, see “LED indications”
  2. Connect device to computer using Micro-USB cable or
    Bluetooth connection:
    • Using Micro-USB cable
    • You will need to install USB drivers, see “How to install USB drivers (Windows)”
    • Using Bluetooth
    • FMB010 Bluetooth is enabled by default. Turn on Bluetooth on your PC, then select Add Bluetooth or other device > Bluetooth. Choose your device named ­ “FMBxxx_last_7_imei_digits”, without LE in the end. Enter default password 5555, press Connect and then select Done.
  3. You are now ready to use the device on your computer.
How to install USB drivers (Windows)
  1. Please download COM port drivers from here.
  2. Extract and run TeltonikaCOMDriver.exe.
  3. Click Next in driver installation window.
  4. In the following window click Install button.

Setup will continue installing the driver and eventually the confirmation window will appear. Click Finish to complete the setup.

Configuration (Windows)

At first FMB010 device will have default factory settings set. These settings should be changed according to the user’s needs. Main configuration can be performed via Teltonika Configurator software. Get the latest Configurator version from here. Configurator operates on Microsoft Windows OS and uses prerequisite MS .NET Framework. Make sure you have the correct version installed.

Table 2 MS .NET requirements

MS .NET REQUIREMENTS

Operating system MS .NET Framework
version
Version Links
Windows Vista
Windows 7
Windows 8.1
Windows 10
MS .NET Framework
4.6.2
32 and 64 bit www.microsoft.com 

Downloaded Configurator will be in compressed archive. Extract it and launch Configurator.exe. After launch software language can be changed by clicking TELTONIKA FMB010 Easy OBDII Tracker User Manual  & troubleshooting 5 in the right bottom corner (Figure 7 Language selection).

TELTONIKA FMB010 Easy OBDII Tracker User Manual  & troubleshooting 6Figure 7 Language selection

Configuration process begins by pressing on connected device (Figure 8 Device connected via USB).

TELTONIKA FMB010 Easy OBDII Tracker User Manual  & troubleshooting 7Figure 8 Device connected via USB

After connection to Configurator Status window will be displayed (Figure 9 Configurator Status window).

TELTONIKA FMB010 Easy OBDII Tracker User Manual  & troubleshooting 8Figure 9 Configurator Status window

Various Status window tabs display information about GNSS, GSM, I/O, Maintenance and etc. FMB010 has one user editable profile, which can be loaded and saved to the device. After any modification of configuration the changes need to be saved to device using Save to device button. Main buttons offer following functionality:

1 TELTONIKA FMB010 Easy OBDII Tracker User Manual  & troubleshooting 9 Load from device – loads configuration from device.
2 TELTONIKA FMB010 Easy OBDII Tracker User Manual  & troubleshooting 10 Save to device – saves configuration to device.
3 TELTONIKA FMB010 Easy OBDII Tracker User Manual  & troubleshooting 11 Load from file – loads configuration from file.
4 TELTONIKA FMB010 Easy OBDII Tracker User Manual  & troubleshooting 12 Save to file – saves configuration to file.
5 TELTONIKA FMB010 Easy OBDII Tracker User Manual  & troubleshooting 13 Update firmware – updates firmware on device.
6 TELTONIKA FMB010 Easy OBDII Tracker User Manual  & troubleshooting 14 Read records – reads records from the device.
7 TELTONIKA FMB010 Easy OBDII Tracker User Manual  & troubleshooting 15 Reboot device – restarts device.
8 TELTONIKA FMB010 Easy OBDII Tracker User Manual  & troubleshooting 16 Reset configuration – sets device configuration to default.
Quick SMS configuration

Default configuration has optimal parameters present to ensure best performance of track quality and data usage. Quickly set up your device by sending this SMS command to it:
” setparam 2001:APN;2002:APN_username;2003:APN_password;2004:Domain;2005:Port;2006:0″

Note: Before SMS text, two space symbols should be inserted.

GPRS settings:

  • 2001 ­ APN
  • 2002 ­ APN username (if there are no APN username, empty field should be left)
  • 2003 ­ APN password (if there are no APN password, empty field should be left)
    Server settings:
  • 2004 ­ Domain
  • 2005 ­ Port
  • 2006 ­ Data sending protocol (0 ­ TCP, 1 ­ UDP)
    TELTONIKA FMB010 Easy OBDII Tracker User Manual  & troubleshooting 17

Default configuration settings

Movement and ignition detection:

TELTONIKA FMB010 Easy OBDII Tracker User Manual  & troubleshooting 18 Vehicle movement will be detected by accelerometer TELTONIKA FMB010 Easy OBDII Tracker User Manual  & troubleshooting 19 Ignition will be detected by vehicle power voltage between 13,2 ­ 30 V

Device makes a record On Moving if one of these events happen:

TELTONIKA FMB010 Easy OBDII Tracker User Manual  & troubleshooting 20 300 seconds passes TELTONIKA FMB010 Easy OBDII Tracker User Manual  & troubleshooting 21 Vehicle turns 10 degrees
TELTONIKA FMB010 Easy OBDII Tracker User Manual  & troubleshooting 22 Vehicle drives 100 meters TELTONIKA FMB010 Easy OBDII Tracker User Manual  & troubleshooting 23 Speed difference between last coordinate and current position is greater than 10 km/h
TELTONIKA FMB010 Easy OBDII Tracker User Manual  & troubleshooting 24 Device makes a record On Stop if:
1 hour passes while vehicle is stationary and ignition is off
TELTONIKA FMB010 Easy OBDII Tracker User Manual  & troubleshooting 25 Records sending to server:
If device has made a record it is sent to the server every 120 seconds

After successful SMS configuration, FMB010 device will synchronize time and update records to configured server.
Time intervals and default I/O elements can be changed by using Teltonika Configurator or SMS parameters.

LED indications

Table 3 Navigation LED indications

BEHAVIOUR  MEANING 
Permanently switched on GNSS signal is not received
Blinking every second Normal mode, GNSS is working
Off GNSS is turned off because:
Device is not working or Device is in sleep mode
Blinking fast constantly Device firmware is being flashed

Table 4 Status LED indications

BEHAVIOUR  MEANING 
Blinking every second Normal mode
Blinking every two seconds Sleep mode
Blinking fast for a short time Modem activity
Off Device is not working or Device is in boot mode

Table 5 Basic characteristics

MODULE
Name Teltonika TM2500
Technology GSM, GPRS, GNSS, BLUETOOTH
GNSS 
GNSS GPS, GLONASS, GALILEO, BEIDOU, SBAS, QZSS, DGPS, AGPS
Receiver 33 channel
Tracking sensitivity -165 dBM
Accuracy < 3 m
Hot start < 1 s
Warm start < 25 s
Cold start < 35 s
CELLULAR 
Technology GSM
2G bands Quad-band 850 / 900 / 1800 / 1900 MHz
Data transfer GPRS Multi-Slot Class 12 (up to 240 kbps)
Data support SMS (text/data)
BLUETOOTH
Specification 4.0 + LE
Supported peripherals Temperature and Humidity sensor, Headset, Inateck Barcode Scanner
INTERFACE
Digital Inputs 1
Connection OBDII socket
GNSS antenna Internal High Gain
GSM antenna Internal High Gain
USB 2.0 Micro-USB
LED indication 2 status LED lights
SIM Micro-SIM
Memory 128MB internal flash memory
PHYSICAL SPECIFICATION
Dimensions 50,7 x 49,6 x 25 mm (L x W x H)
Weight 63 g
OPERATING ENVIRONMENT 
Operating temperature (without battery) -25 °C to +55 °C
Storage temperature (without battery) -40 °C to +70 °C
Operating humidity 5% to 95% non-condensing
Ingress Protection Rating IP41
Battery charge temperature 0 °C to +45 °C
Battery discharge temperature -20 °C to +60 °C
Battery storage temperature
FEATURES 
Sensors Accelerometer
Scenarios Green Driving, Over Speeding
detection, Jamming detection, GNSS
Fuel Counter, Excessive Idling
detection, Unplug  detection, Towing
detection, Crash detection, Auto
Geofence, Manual Geofence, Trip
Sleep modes GPS Sleep, Online Deep Sleep, Deep
Sleep, Ultra Deep Sleep
Configuration and firmware update FOTA Web, FOTA, Teltonika
Configurator (USB, Bluetooth), FMBT
mobile application (Configuration)
SMS Configuration, Events, Debug
GPRS commands Configuration, Debug
Time Synchronization GPS, NITZ, NTP
Ignition detection Digital Input 1, Accelerometer,
External Power Voltage

Safety information

This message contains information on how to operate FMB010 safely. By following these requirements and recommendations, you will avoid dangerous situations. You must read these instructions carefully and follow them strictly before operating the device!

  • The device uses SELV limited power source. The nominal voltage is +12 V DC. The allowed voltage range is +10…+30 V DC.
  • To avoid mechanical damage, it is advised to transport the device in an impact-proof package. Before usage, the device should be placed so that its LED indicators are visible. They show the status of device operation.
  • Before unmounting the device from vehicle, ignition MUST be OFF.
TELTONIKA FMB010 Easy OBDII Tracker User Manual  & troubleshooting 26 Do not disassemble the device. If the device is damaged, the power supply cables are not isolated or the isolation is damaged, DO NOT touch the device before unplugging the power supply.
TELTONIKA FMB010 Easy OBDII Tracker User Manual  & troubleshooting 27 All wireless data transferring devices produce interference that may affect other devices which are placed nearby.
TELTONIKA FMB010 Easy OBDII Tracker User Manual  & troubleshooting 28 Please consult representatives of your vehicle model regarding OBDII location on your vehicle. In case you are not sure about proper connection, please consult qualified personnel.
TELTONIKA FMB010 Easy OBDII Tracker User Manual  & troubleshooting 29 The programming must be performed using a PC with autonomic power supply.
TELTONIKA FMB010 Easy OBDII Tracker User Manual  & troubleshooting 30 Installation and/or handling during a lightning storm is prohibited.
TELTONIKA FMB010 Easy OBDII Tracker User Manual  & troubleshooting 31 The device is susceptible to water and humidity.
TELTONIKA FMB010 Easy OBDII Tracker User Manual  & troubleshooting 32 Teltonika is not responsible for any harm caused by wrong cables used for connection between PC and FMB010
TELTONIKA FMB010 Easy OBDII Tracker User Manual  & troubleshooting 33 WARNING! Do not use FMB010 device if it distracts driver or causes inconvenience due to OBDII placement. Device must not interfere with driver.
TELTONIKA FMB010 Easy OBDII Tracker User Manual  & troubleshooting 34 Battery should not be disposed of with general household waste. Bring damaged or worn-out batteries to your local recycling center or dispose them to battery recycle bin found in stores.

Certification and Approvals

  • FMB010 ANATEL
  • FMB010 CE / RED
  • FMB010 E-Mark
  • FMB010 EAC
  • FMB010 RoHS
  • FMB010 REACH
  • FMB010 Declaration of IMEI assignment
TELTONIKA FMB010 Easy OBDII Tracker User Manual  & troubleshooting 35 This sign on the package means that it is necessary to read the User`s Manual before your start using the device. Full User`s Manual version can be found in our Wiki.
TELTONIKA FMB010 Easy OBDII Tracker User Manual  & troubleshooting 36 This sign on the package means that all used electronic and electric equipment should not be mixed with general household waste.
TELTONIKA FMB010 Easy OBDII Tracker User Manual  & troubleshooting 37 Hereby, Teltonika declare under our sole responsibility that the above described product is in conformity with the relevant Community harmonization: European Directive 2014/53/EU (RED).

TELTONIKA FMB010 Easy OBDII Tracker User Manual  & troubleshooting 38
00647-20-08591
For more information, see the ANATEL website www.anatel.gov.br
This equipment is not entitled to protection against harmful interference and must not cause interference in duly authorized systems.

Warranty

TELTONIKA guarantees its products to be free of any manufacturing defects for a period of 24 months. With additional agreement we can agree on a different warranty period, for more detailed information please contact our sales manager.
Contact us teltonika.lt/company/contacts

All batteries carry a reduced 6 month warranty period.
If a product should fail within this specific warranty time, the product can be:

  • Repaired
  • Replaced with a new product
  • Replaced with an equivalent repaired product fulfilling the same functionality
  • TELTONIKA can also repair products that are out of warranty at an agreed cost.

Warranty Disclaimer

TELTONIKA PRODUCTS ARE INTENDED TO BE USED BY PERSONS WITH TRAINING AND EXPERIENCE. ANY OTHER USE RENDERS THE LIMITED WARRANTIES EXPRESSED HEREIN AND ALL IMPLIED WARRANTIES NULL AND VOID AND SAME ARE HEREBY EXCLUDED. ALSO EXCLUDED FROM THIS LIMITED WARRANTY ARE ANY AND ALL INCIDENTAL OR CONSEQUENTIAL DAMAGES INCLUDING BUT NOT LIMITED TO, LOSS OF USE OR REVENUE, LOSS OF TIME, INCONVENIENCE OR ANY OTHER ECONOMIC LOSS.
More information can be found at teltonika.lt/warranty-repair

FAQ


Setting up TELTONIKA FMB010 Easy OBDII Tracker User Manual is easy with these step-by-step instructions. Follow the steps are you are set-up in no time.

Using TELTONIKA FMB010 Easy OBDII Tracker User Manual is simple by using this manual. Follow the instructions one by one and everything will be fine

Is TELTONIKA FMB010 Easy OBDII Tracker User Manual stuck or not working properly? By resetting it you can set it back to the standard settings and everything should be back to normal. This works in many cases when problems arise.

This page contains the complete user instructions & manual for TELTONIKA FMB010 Easy OBDII Tracker User Manual

All symbols, colors and codes for TELTONIKA FMB010 Easy OBDII Tracker User Manual are explained in this instruction manual. You can find everything you need and moree