TELTONIKA TRB14 User Guide

TELTONIKA TRB14 User Guide & troubleshooting

TELTONIKA TRB14 User Guide  & troubleshooting 1TRB14
Quick Start Guide v2.5

TELTONIKA TRB14 User Guide  & troubleshooting 2

Wiki knowledge base
https://wiki.teltonika-networks.com/

TELTONIKA TRB14 User Guide  & troubleshooting 3

FRONT VIEW

TELTONIKA TRB14 User Guide  & troubleshooting 4

BACK VIEW

TELTONIKA TRB14 User Guide  & troubleshooting 5

DB9 CONNECTOR PINOUT

TELTONIKA TRB14 User Guide  & troubleshooting 6

1. Driver negative signal (D-).
2. Receiver negative signal (R-).
3. Ground (GND).
4. Driver positive (D+).
5. Receiver positive signal (R+).
6. Power input 9-30 VDC (Vin).

POWER SOCKET PINOUT

TELTONIKA TRB14 User Guide  & troubleshooting 7

HARDWARE INSTALLATION

TELTONIKA TRB14 User Guide  & troubleshooting 8

  1. Unscrew two back panel hex bolts.
  2. Remove the back panel.
  3. Insert your SIM card into the SIM socket.
  4. Attach the panel and tighten the hex bolts.
  5. Attach the mobile antenna (max torque 0.4 N·m / 3.5 lbf·in) and connect the USB cable.

DEVICE CONFIGURATION

  1. Power on the device and connect the USB cable to your computer.
  2. Allow the gateway to boot up. This might take up to 30 seconds.
  3. Your computer’s OS should detect the USB device and install the driver
  4. To enter the gateway’s Web interface (WebUI), type http://192.168.2.1 into the URL field of your Internet browser.
  5. Use login information shown in image A when prompted for authentication.
  6. After logging in pay attention to the Signal Strength indication displayed in the Mobile widget (image B). To maximize the cellular performance try adjusting the antennas or changing the location of your device to achieve the best signal conditions.

TELTONIKA TRB14 User Guide  & troubleshooting 9

TECHNICAL INFORMATION

Radio specifications
RF technologies 2G, 3G, 4G
Max RF power 33 dBmeGSM, 24 [email protected], 23 [email protected]
Bundled accessories specifications*
Power adapter Input: 0.4 Ag100-240 VAC, Output: 9 VDC, 0.5 A, 4-pin plug
Mobile antenna 699-868 / 1850-2690 MHz, 50 0, VSWR<3, gain** 1 dBi, omnidirectional, SMA male connector

*Order code dependent.
**Higher gain antenna can be connected to compensate for cable attenuation when a cable is used. The user is responsible for compliance with the legal regulations.

SAFETY INFORMATION

Hereby, TELTONIKA NETWORKS declares that this TRB145 is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU.

The full text of the EU declaration of conformity is available at the following Internet address: https://wiki.teltonika-networks.com/view/TRB145_CE/RED
Instruction Manual: Connect the power adapter to turn on the device. Open 192.168.2.1 in your web browser to configure it. More information on
https://wiki.teltonika-networks.com/

TELTONIKA TRB14 User Guide  & troubleshooting 10This sign means that all used electronic and electric equipment should not be mixed with general household waste.

TELTONIKA TRB14 User Guide  & troubleshooting 11This sign means that the product meets the requirements of the applicable EU directives.

www.teltonika-networks.com
©2020 Teltonika Networks

References

FAQ


Setting up TELTONIKA TRB14 User Guide is easy with these step-by-step instructions. Follow the steps are you are set-up in no time.

Using TELTONIKA TRB14 User Guide is simple by using this manual. Follow the instructions one by one and everything will be fine

Is TELTONIKA TRB14 User Guide stuck or not working properly? By resetting it you can set it back to the standard settings and everything should be back to normal. This works in many cases when problems arise.

This page contains the complete user instructions & manual for TELTONIKA TRB14 User Guide

All symbols, colors and codes for TELTONIKA TRB14 User Guide are explained in this instruction manual. You can find everything you need and moree