Topens Universal External Receiver User Manual

Topens Universal External Receiver User Manual & troubleshooting

Topens Universal External Receiver User Manual

Topens Universal External Receiver User Manual  & troubleshooting 2

Topens Universal External Receiver User Manual  & troubleshooting 3

Topens Universal External Receiver User Manual  & troubleshooting 4

http://www.topenstool.com/

Thank you for your purchasing ERM12 universal external receiver. It’s compact, simple to operate and highly reliable.

Topens Universal External Receiver User Manual  & troubleshooting 5

1. Definition of the wires:
RED: Positive of the power input. 9-24VDC+.
BLACK: Negative of the power input. 9-24VDC-.
BROWN: Signal output. Normally open to BLACK wire and temporary closed (500mS) to BLACK wire when the receiver is activated.

2. Program the remote to the receiver:
Press and release the Learn button in receiver, the LED light will be ON, then press the key in the remote twice in 4 seconds, the LED light will flash for 3 seconds and then to OFF. Now the re mote has been programmed successfully.

NOTE: Maximum 250PCS remotes can be programmed to the receiver.

3. Erase all Remote Codes:
Press and hold the Learn button until the LED light from ON to OFF. Now all remote codes have been erased.

4. Wire connection:
For the TOPENS gate opener, please connect the receiver to the control board refer to the chapter “Connection of the control board” of the user manual of the gate opener.

4.1 Connect the external receiver to the door opener if it is with Aux.9-24VDC output.

Topens Universal External Receiver User Manual  & troubleshooting 6

e.g. Connect the external receiver to CRAFTSMAN garage door opener.
(a). Connect the black wire into “NEC” terminal.
(b). Connect the brown wire into “CL2” terminal.
(c). Connect the red wire into “24V” terminal.

Topens Universal External Receiver User Manual  & troubleshooting 7

e.g. Connect the external receiver to CHAMBERLAIN garage door opener.
(a). Connect the black wire into “NEC” terminal.
(b). Connect the brown wire into “CL2” terminal.
(c). Connect the red wire into “24V” terminal.

Topens Universal External Receiver User Manual  & troubleshooting 8

e.g. Connect the external receiver to GENIE garage door opener.
(a). Connect the black wire into “COMMON” terminal.
(b). Connect the brown wire into “PUSHBUTTON” terminal.
(c). Connect the red wire into “BEAM” terminal.

Topens Universal External Receiver User Manual  & troubleshooting 9

4.2. Connect the external receiver to the door opener if it is without Aux. 9-24VDC output.
In this situation, you need an external 9-24VDC power source to make the receiver to work with the door opener.

Topens Universal External Receiver User Manual  & troubleshooting 10

Topens Universal External Receiver User Manual  & troubleshooting 11

http://www.topenstool.com/

Any question, please do not hesitate to contact us:
E-mail: [email protected]

Kindly include your Product Model, Purchasing Date & Site, Order #, and your contact information. All your concerns will be replied within 24 hours.

Tel: +86 (571) 8908 0213 (China)
Mon-Fri 9:00AM-5:30PM (UTC +08:00)

References

FAQ


Setting up Topens Universal External Receiver User Manual is easy with these step-by-step instructions. Follow the steps are you are set-up in no time.

Using Topens Universal External Receiver User Manual is simple by using this manual. Follow the instructions one by one and everything will be fine

Is Topens Universal External Receiver User Manual stuck or not working properly? By resetting it you can set it back to the standard settings and everything should be back to normal. This works in many cases when problems arise.

This page contains the complete user instructions & manual for Topens Universal External Receiver User Manual

All symbols, colors and codes for Topens Universal External Receiver User Manual are explained in this instruction manual. You can find everything you need and moree