Turbosound 300 Watt 10″ Low Frequency Loudspeaker User Guide

Turbosound 300 Watt 10″ Low Frequency Loudspeaker User Guide & troubleshooting

Turbosound 300 Watt 10″ Low Frequency Loudspeaker User Guide

Turbosound 300 Watt 10″ Low Frequency Loudspeaker User Guide  & troubleshooting 1

Features

  • 10″ high-power woofer for
  • PA applications
  • Continuous power: 300 Watts RMS
  • Maximum power: 1,200 Watts Peak
  • Impedance: 8 Ohms
  • Frequency range: 53 Hz – 4 kHz
  • SPL: 93 dB (1 W / 1 m)
  • Rigid aluminum die-cast frame
  • Mounting hole diameter: 245 mm (9.65″)
  •  Shipment weight: 5.1 kg (11.2 lbs) and Net weight: 4.5 kg (9.9 lbs)
  • Overall diameter: 261 mm (10.28″)
  •  3-Year Warranty Program*
  • Designed and engineered in England

Dimensional Diagrams

Turbosound 300 Watt 10″ Low Frequency Loudspeaker User Guide  & troubleshooting 2
Turbosound 300 Watt 10″ Low Frequency Loudspeaker User Guide  & troubleshooting 3

Frequency Charts

Turbosound 300 Watt 10″ Low Frequency Loudspeaker User Guide  & troubleshooting 4

  • Sound Pressure Level (dB)
  • Frequency (Hz)
  • Impedance (ohm)

 

General Specification

Loudspeaker diameter

 

261 mm / 10″

  Thiele & Small Parameters

Resonance frequency (Fs)

 

53 Hz

Impedance 8 Ω   DC resistance (Re) 7.8 Ω
Continuous power rating1 300 W   Mechanical Q factor (Qms) 7.45
Peak power rating2 1200 W   Electrical Q factor (Qes) 0.44
Sensitivity 93 dB (±3 dB, 1 W / 1 m)   Total Q factor (Qts) 0.41
Frequency range Fo ~4 kHz (-10 dB)   Mechanical moving mass (Mms) 47.8 g
Magnet size 156 mm   Mechanical compliance (Cms) 0.19 Mm/N
Voice coil diameter 65.5 mm / 2.5″   Force factor (Bl) 16.9
Bobbin material Glass fiber SV   Equivalent acoustic volume (Vas) 31.6 I
Wire type PISV wire   Maximum linear displacement (Xmax) 3.4 Mm
Winding height 17 mm   Diaphragm area (Sd) 346 Sq cm
Layers 2   Voice coil inductance @ 1 kHz (Le) 0.8 mH
Cone body Paper    

Notes to Specification

  • Pink noise with 6 dB crest factor for 2 hours
  • Peak power is defined as continuous power +6 dB
Shipping Informationg
Net weight 4.5 kg / 9.9 lbs
Shipping weight 5.1 kg (11.2 lbs)

Application

This loudspeaker is exclusively meant for the reproduction of audio signals according to instructions and specifications given in this manual. We‘re not liable for any damage caused by unintended use.

 

 

 

 

 

 

FAQ


Setting up Turbosound 300 Watt 10″ Low Frequency Loudspeaker User Guide is easy with these step-by-step instructions. Follow the steps are you are set-up in no time.

Using Turbosound 300 Watt 10″ Low Frequency Loudspeaker User Guide is simple by using this manual. Follow the instructions one by one and everything will be fine

Is Turbosound 300 Watt 10″ Low Frequency Loudspeaker User Guide stuck or not working properly? By resetting it you can set it back to the standard settings and everything should be back to normal. This works in many cases when problems arise.

This page contains the complete user instructions & manual for Turbosound 300 Watt 10″ Low Frequency Loudspeaker User Guide

All symbols, colors and codes for Turbosound 300 Watt 10″ Low Frequency Loudspeaker User Guide are explained in this instruction manual. You can find everything you need and moree