VonHaus 3500195 1/2” Torque Wrench with Reducer & Extension Bar Instruction Manual

VonHaus 3500195 1/2” Torque Wrench with Reducer & Extension Bar Instruction Manual & troubleshooting

VonHaus 3500195 1/2” Torque Wrench with Reducer & Extension Bar Instruction Manual  & troubleshooting 1

VonHaus 3500195 1/2” Torque Wrench with Reducer & Extension Bar

VonHaus 3500195 1/2” Torque Wrench with Reducer & Extension Bar Instruction Manual  & troubleshooting 2

  • Please read all instructions carefully before use and retain for future reference.
  • CAUTION Sharp edges
  • Protect your hands
  • Protect your eyes
  • Wear suitable footwear.

Basic safety precautions should always be followed when using hand tools.

GENERAL PRECAUTIONS

This tool is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience or knowledge, unless supervised and given appropriate instruction regarding the correct use of the tool by a person responsible for their safety. Read, and make sure you fully understand, all safety information before using this wrench. Failure to follow the warnings and instructions may result in serious injury. Please retain this guide for future reference. This tool is not a toy. Keep away from children and animals. Children and pets should be supervised to ensure they are kept away from the work area. Never use hand tools as power tool accessories. You should never combine the use of a power tool with a manual tool unless specified as doing so can cause serious personal injury. Do not use the tool for anything other than its intended use. Always secure your workpiece. Smaller workpieces should be secured using a vice or clamp during use

WORK AREA SAFETY

Keep your work area clean and well lit. Cluttered or dark areas invite accidents.Do not use tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Use of some tools can create sparks that may ignite the dust or fumes. Keep children, pets and bystanders away whilst using the tool. Distractions can cause you to lose control. Shut off any live electrical equipment around your work area before commencing work with any non-insulated tool. Only use insulated tools and tools with appropriate IEC/VDE working on live electrical applications.

BEFORE USE

Do not use hand tools whilst you are tired or under the influence of drugs, alcohol or medication. A moment of inattention whilst using tools may result in serious personal injury. Use safety equipment. Always wear eye protection. Safety equipment such as a dust mask, non-skid safety shoes, hard hat, safety gloves or hearing protection used for appropriate conditions will reduce the risk of personal injury. Dress appropriately. Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves away from moving parts. Loose-fitting clothes, jewelry or long hair can become caught in moving parts. It is recommended to fully sharpen tools before first use (where applicable). Become familiar with the tool. Practice use of the tool on scrap material until you are familiar with the correct handling, use and limitations of the tool. If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of these devices can reduce dust-related hazards. Safety glasses or goggles should be worn at all times when using any hand tool. Always follow the manufacturer’s directions regarding torque direction, proper force, torque pattern/sequence, use or non-use of lubrication on fasteners and torque “tighten/release” cycles. Do not exceed the recommended working range of the torque wrench. Reliable measurements are based on a percentage of the working range. In general, mechanical wrenches have a useable range from 20% to 100% of full scale. Do not use accessories or handle extensions unless specifically required. The more extensions used, the less accurate the torque setting will be. Take time to inspect the tool and check for worn or cracked sockets. Properly lubricate and replace worn parts. Avoid dropping or sliding the torque wrench. Dropping the torque wrench on a hard surface can cause the instrument to lose reliable calibration. If you suspect that the wrench has been dropped, have the tool inspected by the manufacturer or reputable calibration service. Always store the torque wrench in the protective case provided when not in use. Avoid exposure to temperature extremes, high humidity, fluid immersion and corrosive environments. Alwas store this click-type Torque Wrench on the lowest level on the scale to prolong the life of the wrench. Avoid marking, etching or placing labels on torque wrenches. Use the torque wrench to apply a specific torque value during the final assembly process. Do not use a torque wrench as the primary means of tightening or loosening fasteners. As most torque wrenches are length specific, always grasp the torque wrench in the center of the handle. Iftwo hands need to be used, place one hand on top of the other. Apply torque in a slow, methodical manner and avoid sudden, “jerking” movements. When the wrench signals (by clicking) that a specific torque has been reached, stop pulling immediately. After 5000 cycles or up to one year of use, whichever comes first, have your torque wrench inspected and recalibrated by a reputable calibration service. At low torque settings, pull the wrench slowly to obseve the click. Avoid using universal joint extensions this will give an inaccurate reading.

IMPORTANT SAFETY INFORMATION FOR USE

Use the tool, accessories and tool bits in accordance with these instructions and in the manner intended for the particular type of tool, taking into account the working conditions and the work to be performed. Use of the tool for operations different from those intended could result in a hazardous situation. Stay alert, watch what you are doing, and use common sense when using the tool. Beware of sharp edges. Handle sharp-edged and pointed tools with care. Ensure sharp-edged and  pointed tools are kept sharp as this will make them easier to control. Do not force the tool. Always use the correct tool for your application. The correct tool will do the job better and more safely at the rate for which it was designed. Do not overreach. Keep proper footing and balance at all times. This will enable better control of the tool in unexpected situations. Always use the correct type of tool for the type of material being worked on.

NOTE

The above list is non-exhaustive and is recommended as a basic level of protection for general tasks. Before starting any task, refer to your local hardware store or a professional for advice on which safety equipment would be best suited to the task at hand.

Ensure you have all the pieces listed. If you are missing any components, contact our customer services department at  [email protected] (UK/EU)

COMPONENTSVonHaus 3500195 1/2” Torque Wrench with Reducer & Extension Bar Instruction Manual  & troubleshooting 3

  1. Square Drive.
  2. Direction Switch
  3. Handle Pivot Point.
  4. Scale
  5. Knurled Handle
  6. Lock Nut.
  7. Socket.
  8. Extension.
  9. Storage Case

ASSEMBLYVonHaus 3500195 1/2” Torque Wrench with Reducer & Extension Bar Instruction Manual  & troubleshooting 4

DISPOSAL INFORMATION
Please recycle where facil-ities exist. Check with your local authority for recycling advice.

CUSTOMER SERVICE
If you are having difficulty using this product and require support, please contact [email protected] (UK/EU) [email protected] (US)

WARRANTY

To register your product and find out if you qualify for a free extended warranty please go to www.vonhaus.com/warranty. Please retain a proof of purchase receipt or statement as proof of the purchase date. The warranty only applies if the product is used solely in the manner indicated in the warnings page of this manual, and all other instructions have been followed accurately. Any abuse of the product or the manner in which it is used will invalidate the warranty. Returned goods will not be accepted unless re-packaged in its original packaging and accompanied by a relevant and completed returns form. This does not affect your stat-utory rights. No rights are given under this warranty to a person acquiring the appliance second-hand or for com-mercial or communal use.
COPYRIGHT All material in this instruction manual are copyrighted by DOMU Brands.Any unauthorised use may violate worldwide copyright, trademark, and other laws.

THANK YOU
Thank you for purchasing your product/appliance. Should you require further assistance with your purchase, you can contact us at [email protected] (UK/EU) [email protected] (US) VonHaus is a registered trademark of DOMU Brands Ltd. Made in China for DOMU Brands. M24 2RW.

FAQ


Setting up VonHaus 3500195 1/2” Torque Wrench with Reducer & Extension Bar Instruction Manual is easy with these step-by-step instructions. Follow the steps are you are set-up in no time.

Using VonHaus 3500195 1/2” Torque Wrench with Reducer & Extension Bar Instruction Manual is simple by using this manual. Follow the instructions one by one and everything will be fine

Is VonHaus 3500195 1/2” Torque Wrench with Reducer & Extension Bar Instruction Manual stuck or not working properly? By resetting it you can set it back to the standard settings and everything should be back to normal. This works in many cases when problems arise.

This page contains the complete user instructions & manual for VonHaus 3500195 1/2” Torque Wrench with Reducer & Extension Bar Instruction Manual

All symbols, colors and codes for VonHaus 3500195 1/2” Torque Wrench with Reducer & Extension Bar Instruction Manual are explained in this instruction manual. You can find everything you need and moree