3515254 / 3500027 / 3500053
Please read all instructions carefully before use and retain them for future reference.
CAUTION Do not immerse in water.
Wear a dust mask
Protect your hands.
Protect your eyes.
Protect your ears.
PRODUCT DISPOSAL INFORMATION
For electrical products sold within the European Community, at the end of the electrical product’s useful life, they should not be disposed of with household waste. Please recycle where facilities exist. Contact your local authority for details of collection schemes in your area.
In all circumstances:
Do not dispose of the domestic waste.
Do not incinerate.
Do not abandon the environment.
Do not dispose of WEEE as unsorted municipal waste.
Please read all instructions carefully before use and retain them for future reference.
Only operate the power tool/machine for its intended purpose and within the parameters specified in this manual.
This power tool/machine is for domestic use only. Do not use outdoors or on wet surfaces.
This power tool/machine is not intended for use by persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge unless supervised or given appropriate instruction concerning the product’s use by a person responsible for their safety.
Do not allow it to be used as a toy. Children should be supervised to ensure they do not play with the power tool/machine.
If the power tool/machine is not functioning properly, has been dropped, damaged, left outdoors, or immersed in liquid, do not use it, contact DOMU Brands Customer Services.
Do not use the power tool/machine if any parts appear to be faulty, missing, or damaged.
Ensure all parts are securely attached before use.
RISK OF PERSONAL INJURY
Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges, and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
Prevent unintentional starting. Ensure the switch is in the off position before connecting to the power source and/ or battery pack, picking up or carrying the tool. Carrying
power tools with your finger on the switch, or energizing power tools that are switched on, invite accidents.
Do not operate power tools in explosive atmospheres such as in the presence of flammable liquids, gases, or dust. Power tools create sparks that may ignite dust or fumes.
Always wear eye protection. Any power tool can throw foreign objects into your eyes and cause permanent eye damage. Always wear safety goggles (not glasses) that comply with ANSI safety standard Z87.1. Everyday glasses have only impact-resistant lenses.
Do not expose power tools to rain or wet conditions.
Water entering the power tools will increase the risk of electric shock.
Stay alert, watch what you are doing, and use common sense when operating a power tool/machine. Do not use a power tool/machine while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating a power tool/machine may result in serious personal injury.
Use personal protective equipment. Always wear eye protection.
Protective equipment such as dust masks, non-skid safety shoes, hard hats, or hearing protection used for appropriate conditions will reduce personal injuries.
Prevent unintentional starting.
Ensure the switch is in the off-position before connecting to a power source and/or battery pack, picking up or carrying the tool.
Carrying a power tool/machine with your finger on the switch or energizing a power tool/machine that has the switch on invites accidents.
Remove any adjusting key or spanner before turning the power tool/machine on. A spanner or a key left attached to a rotating part of the power tool/machine may result in personal injury.
Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool/ machine in unexpected situations.
Dress appropriately. Do not wear loose clothing or jewelry.
Keep your hair, clothing, and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts.
If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. The use of dust collection can reduce dust-related hazards.
WORK AREA SAFETY
Keep the work area clean and well-lit.
Cluttered or dark areas invite accidents.
Do not operate power tools/machines in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust.
Power tools/machines create sparks that may ignite dust or fumes.
Keep children and bystanders away while operating a power tool/machine. Distractions can cause you to lose control.
GENERAL POWER TOOL USE AND CARE
Do not force the power tool/machine. Use the correct power tool/machine for your application. The correct power tool/machine will do the job better and be safer at the rate at which it was designed.
Do not use the power tool/machine if the switch does not turn on and off. Any power tool/machine that cannot be controlled with the switch is dangerous and must be
Disconnect the plug from the power source and/or the battery pack from the power tool/machine before making any adjustments, changing accessories, or storing power tool/machine tools. Such preventive safety measures reduce the risk of starting the power tool/machine accidentally. Store idle power tool/machine out of the reach of children and do not allow persons unfamiliar with the power tool/ machine or these instructions to operate the power tool/ machine.
Power tools/machines are dangerous in the hands of untrained users.
Maintain power tools/machines. Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the power tool/machine’s operation. If damaged, have the power tool/machines repaired before use. Many accidents are caused by poorly maintained power tools/machines.
Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.
Use the power tool/machine accessories and tool bits in accordance with these instructions, and take into account the working conditions and the work to be performed.
Use of the power tool/machine for operations different from those intended could result in a hazardous situation.
CLEANING & MAINTENANCE
Never soak or immerse electrical components or a component that has a plug attached.
Disconnect the plug from the power source before making any adjustments, changing accessories, or storing.
Such preventive safety measures reduce the risk of starting the power tool accidentally.
Ensure the motor has fully stopped before cleaning, clearing a blockage, checking, or carrying out any maintenance on the tool.
Maintain your power tool. Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired by a qualified repair person before use. Many accidents are caused by poorly maintained power tools. Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control. Regularly check external nuts and fixings to ensure vibration caused by normal use has not begun to loosen them. Store idle power tools out of reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the Breaker. Locate the power tool out of reach of children, in a dry, locked unit. Make sure that the cord is located so that it will not be stepped on, tripped over, or otherwise subjected to damage or stress. Remove the plug from the main socket/battery (where applicable)before carrying out any adjustment or maintenance. Always store the power tool/machine in a dry place. If the power cord is damaged, it must be replaced by a qualified service technician. Keep the ventilation slots and motor housing as free of dirt and dust as possible(where applicable). Clean the power tool/machine by rubbing it with a clean cloth and blowing it clean using low-pressure compressed air is recommended. Ensure you have all the pieces listed. If you are missing any components, contact our customer services department at [email protected] (UK/EU) [email protected] (US). DO NOT proceed with assembly if any components are missing.
HANDHELD SCREWDRIVERS & IMPACT WRENCHES
Hold the Power Tool by insulated gripping surfaces when performing an operation where the fastener may contact hidden wiring or its own cord. Fasteners contacting a ‘live’ wire may make exposed metal parts of the power tool ‘live’ and could deliver an electric shock.
WARNING The use, and particularly abuse of portable sealed secondary lithium cells and batteries may result in the creation of hazards and may cause harm.
Do not dismantle, open or shred secondary cells or batteries.
Keep batteries out of the reach of children.
NOTE the battery pack is not fully charged out of the box. Secondary cells and batteries need to be charged before use, always refer to the cell or battery manufacturer’s instructions and use the correct charging procedure. Recharge only with the charger specified bythe manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack. Use the appliance/power tool/machines only with specifically designated battery packs. The use of any other battery packs may create a risk of injury and fire. First, read the safety instructions and then follow the charging notes and procedures. Incorrect reassembly may result in a risk of electric shock or fire. Protect the battery and charger against water and moisture. Always keep cells and batteries clean and dry. Wipe the cell or battery terminals with a clean dry cloth they become dirty. Protect the battery from heat and fire. Place the charger in a position away from any heat source and avoid storage in direct sunlight. Do not maintain secondary cells and batteries on charge when not in use. After extended periods of storage, it may be necessary to charge and discharge the cells or batteries several times to btain maximum performance. Do not short-circuit a cell or battery. Do not store cells or batteries haphazardly in a box or drawer where they may short-circuit each other or be short-circuited by conductive materials. When the battery pack is not in use, keep it away from other metal objects such as paper clips, coins, keys, nails, screws, or other small metal objects that can make a connection from one terminal to another. Short-circuiting the battery terminals together may result in burns or a fire. Do not expose cells or batteries to mechanical shock. Never attempt to open the battery pack for any reason or if the plastic housing of the battery pack breaks or cracks, immediately discontinue use and do not recharge. When possible, remove the battery from the appliance/ power tool/machine when not in use. Do not leave a battery on prolonged charge when not in user stored for extended periods of time as this may cause damage to the battery. To facilitate cooling of the battery pack after use, avoid placing the charger or battery pack in a arm environment such as a metal shed or an uninsulated trailer. To reduce the risk of electric shock, unplug the charger from the outlet before attempting any cleaning. Removing the battery pack will not reduce this risk. In the event of a cell leaking, do not allow the liquid to come into contact with the skin or eyes. If contact has been made, wash the affected area with copious amounts of water and seek medical advice. Seek medical advice immediately if a cell or battery has been swallowed. Always observe the polarity marks (+) and (-) on the cell, battery, and equipment and ensure correct use. Retain the original cell and battery literature for future reference When disposing of secondary cells or batterie, keep cells or batteries of different electrochemical systems separate from each other.
Do not use any cell or battery which is not designed for use with the equipment.
Do not mix any cells of different manufacturers, capacities, sizes,s, or types within a device.
Always purchase the battery recommended by the device manufacturer for the equipment.
ADDITIONAL SAFETY INFORMATION FOR BATTERY CHARGERS.
This appliance should not be used by children and/or persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge.
Children shall not play with the appliance.
Do not place any object on top of the charger or place the charger on a soft surface that may result in excessive internal heat. Do not attempt to disassemble the charger. Take it to an electrician or tool repairer when service or repair is required. Appliances/power tools/machines with Lithium-ion batteries shall only be charged with the specifically designed Lithium-ion battery charger purchased with this tool. Do not attempt to charge the battery with any charger other than the one supplied as this is potentially dangerous. Before using the charger, read all instructions, labels, and cautionary markings on the charger. The charger is not intended to be used for any purpose other than charging the battery pack for this tool. Any other use may result in a risk of fire or electric shock. Do not attempt to use the charger on any other voltage or rating than those stated on the rating plate. Do not use the charger for any purpose other than that for which it is intended. Do not use the charger to charge any device other than the appliance/power tool/machine it was sold with. Do not use an extension cord unless absolutely necessary. The use of an improper extension cord could result in fire or electric shock. Never attempt to connect two chargers together. Use the battery charger indoors only. Make sure that the charger cable is positioned where it will not be stepped on, tripped over, or otherwise subjected to damage or stress. Keep the cord away from the operating appliance/power tool/machine. Do not operate the charger in a cabinet or other enclosure unless ventilation is adequate. Do not place any object onto the charger or allow any object to rest on the charger. Never place the appliance/power tool/machine or charger near a vera heat source such as a radiator or heater.
WARNING Never charge your Lithium-ion battery below or above temperatures recommended as this may result in fire or permanent damage to the battery. The most suitable temperatures to charge the battery are between 20°C/68°F and 25°C/77°F.
WARNING Do not allow water or any other iquid to come into contact with the charger as this may result in electric shock. Do not position the tool or battery charger near water. Take care not to spill liquid of any kind on the tool or charger.
DANGER Do not use the charger if it has been subjected to a heavy knock, dropped, or otherwise damaged in any way. Take the charger to an authorized service center for it to be checked and repaired. Do not attempt to disassemble the charger by opening or removing covers. To reduce the risk of damage to the electric plug and cord, pull by the plug rather than the cord when disconnecting the charger.
|Charger Input:||100-240V~, 50/60Hz 0.2A|
|Charger output:||5.5A 0.6A|
|Tool Rating:||3.6V 1.3Ah|
DECLARATION OF CONFORMITY
DOMU Brands Ltd
5th Floor The Tower
Deva City Office Park
Declare under our sole responsibility the product:
3.6 Li-ion Screwdriver 50pc Set
Complies with the essential requirements of the following directives:
And the Standards
BS EN 62841-1:2015, BS EN 62841-2-2:2014, EN 55014-1:2006+A1+A2, EN 55014-2:2015
EN 61000-3-2:2014, EN 61000-3-3:2013, EN 60335-1:2012+A11:2014, EN 60335-2-29:2004+A2:2010, EN 62233:2008
Authorized Signatory on behalf of DOMU Brands Ltd.
|1. Chuck Sleeve
2. Torque Dial
3. Battery Level Indicator
4. Handle Adjustment Button
5. Direction Control
6. Charger Input
8. Torch On/Off Switch
9. Power Trigger
10. Work LED
11. Charger (not shown)
INSERTING A BIT
Please recycle where facilities exist. Check with your local authority for recycling advice.
To register your product and find out if you qualify for a free extended warranty please go to www.vonhaus.com/warranty. Please retain a proof of purchase receipt or statement as proof of the purchase date. The warranty only applies if the product is used solely in the manner indicated on the warnings page of this manual, and all other instructions have been followed accurately. Any abuse of the product or the manner in which it is used will invalidate the warranty. Returned goods will not be accepted unless re-packaged in their original packaging and accompanied by a relevant and completed returns form. This does not affect your statutory rights. No rights are given under this warranty to a person acquiring the appliance second-hand or for commercial or communal use.
COPYRIGHT All material in this instruction manual is copyrighted by DOMU Brands. Any unauthorized use may violate worldwide copyright, trademark, and other laws.
Thank you for purchasing your product/appliance.
Should you require further assistance with your purchase, you can contact us at [email protected] (UK/EU) [email protected] (US) VonHaus is a registered trademark of DOMU Brands Ltd.
Made in China for DOMU Brands. M24 2RW.