vtech Full Color Pan and Tilt HD Video Monitor User Guide

vtech Full Color Pan and Tilt HD Video Monitor User Guide & troubleshooting

vtech Full Color Pan and Tilt HD Video Monitor User Guide  & troubleshooting 1

Quick start guide

VM919HD
VM919-2HD
Full-Color Pan and Tilt
HD Video Monitor

Go to www.vtechphones.com
to register your product for enhanced warranty support and the latest VTech product news.

vtech Full Color Pan and Tilt HD Video Monitor User Guide  & troubleshooting 2

Important safety instructions

The applied nameplate is located at the bottom of the baby unit’s base.
When using your equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury, including the following:

  1. Follow all warnings and instructions marked on the product.
  2. Adult setup is required.
  3. CAUTION: Do not install the baby unit at a height above 2 meters.
  4. This product is not a substitute for adult supervision of the infant. Supervising the infant is the parent’s or caregiver’s responsibility. This product could cease operating, and therefore you should not assume it will continue working properly for any given period of time. Further, this is not a medical device and should not be used as such. This product is intended to assist you in supervising your baby.
  5.  Do not use this product near water. For example, do not use it next to a bathtub, washbowl, kitchen sink, laundry tub, or swimming pool, or in a wet basement or shower.
  6. vtech Full Color Pan and Tilt HD Video Monitor User Guide  & troubleshooting 3 CAUTION: Use only the battery provided.
    There may be a risk of explosion if the wrong type of battery is used for the parent unit. The battery cannot be subjected to high or low extreme temperature and low air pressure at high altitudes during use, storage, or transportation. Disposal of the battery into fire or a hot oven, or mechanically crushing or cutting or the battery can result in an explosion. Leaving
    the battery in an extremely high temperature surrounding environment can result in an explosion or the leakage of flammable liquid of gas. Battery subjected to extremely low air pressure may result in an explosion or the leakage of flammable liquid or gas. Dispose of used battery according to the information in The RBRC seal.
  7. Use only the adapters included with this product.
    Incorrect adapter polarity or voltage can seriously damage the product.
    Baby unit and parent unit power adapters: Output: 5V DC 1000mA or 5V DC 1500mA.
  8. The power adapters are intended to be correctly oriented in a vertical or floor mount position. The prongs are not designed to hold the plug in place if it is plugged into a ceiling, under-the-table, or cabinet outlet.
  9. For pluggable equipment, the socket-outlet shall be installed near the equipment and shall be easily accessible.
  10. Unplug this product from the wall outlet before cleaning.
    Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning.
  11. Do not cut off the power adapters to replace them with other plugs, as this causes a hazardous situation.
  12. Do not allow anything to rest on the power cords. Do not install this product where the cords may be walked on or crimped.
  13. This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply in your home, consult your dealer or local power company.
  14. Do not overload wall outlets or use an extension cord.
  15. Do not place this product on an unstable table, shelf, stand, or other unstable surfaces.
  16.  This product should not be placed in any area where proper ventilation is not provided. Slots and openings in the back or bottom of this product are provided for ventilation. To protect them from overheating, these openings must not be blocked by placing the product on a soft surface such as a bed, sofa, or rug. This product should never be placed near or over a radiator or heat register.
  17. Never push objects of any kind into this product through the slots because they may touch dangerous voltage points or create a short circuit. Never spill liquid of any kind on the product.
  18. To reduce the risk of electric shock, do not disassemble this product, but take it to an authorized service facility. Opening or removing parts of the product other than specified access doors may expose you to dangerous voltages or other risks. Incorrect reassembling can cause electric shock when the product is subsequently used.
  19. You should test the sound reception every time you turn on the units or move one of the components.
  20. Periodically examine all components for damage.
  21. There is a very low risk of privacy loss when using certain electronic devices, such as baby monitors, cordless telephones, etc. To protect your privacy, make sure the product has never been used before purchase, reset the baby monitor periodically by powering off and then powering on the units, and power off the baby monitor if you will not use it for some time.
  22. Children should be supervised to ensure that they do not play with the product.
  23. The product is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.

SAVE THESE INSTRUCTIONS

Cautions

  1. Use and store the product at a temperature between 32º F and 104º F.
  2. Do not expose the product to extreme cold, heat, or direct sunlight. Do not put the product close to a heating source.
  3. Batteries should not be exposed to excessive heat such as bright sunshine or fire.
  4. vtech Full Color Pan and Tilt HD Video Monitor User Guide  & troubleshooting 4 Warning—Strangulation Hazard— Children have STRANGLED in cords.
    Keep this cord out of the reach of children (more than 3 ft (0.9m) away). Do not remove this tag.
    vtech Full Color Pan and Tilt HD Video Monitor User Guide  & troubleshooting 5
  5. Never place the baby unit(s) inside the baby’s crib or playpen. Never cover the baby unit(s) or parent unit with anything such as a towel or a blanket.
  6. Other electronic products may cause interference with your baby monitor. Try installing your baby monitor as far away from these electronic devices as possible: wireless routers, radios, cellular telephones, intercoms, room monitors, televisions, personal computers, kitchen appliances, and cordless telephones.

Precautions for users of implanted cardiac pacemakers
Cardiac pacemakers (applies only to digital cordless devices):
Wireless Technology Research, LLC (WTR), an independent research entity, led a multidisciplinary evaluation of the interference between portable wireless devices and implanted cardiac pacemakers. Supported by the U.S. Food and Drug Administration, WTR recommends to physicians that:

Pacemaker patients

  • Should keep wireless devices at least six inches from the pacemaker.
  • Should NOT place wireless devices directly over the pacemaker, such as in a breast pocket, when it is turned ON.
    WTR’s evaluation did not identify any risk to bystanders with pacemakers from other persons using wireless devices.

Electromagnetic fields (EMF)
This VTech product complies with all standards regarding electromagnetic fields (EMF). If handled properly and according to the instructions in this user’s manual, the product is safe to be used based on scientific evidence available today.

vtech Full Color Pan and Tilt HD Video Monitor User Guide  & troubleshooting 6 What’s in the box

vtech Full Color Pan and Tilt HD Video Monitor User Guide  & troubleshooting 7

Connect the baby monitor

vtech Full Color Pan and Tilt HD Video Monitor User Guide  & troubleshooting 8NOTE

  • The rechargeable battery in the parent unit is built-in.
  • Use only the power adapters supplied with this product.
  • Make sure the parent unit and the baby unit are not connected to the switch-controlled electric outlets.
  • Connect the power adapters in a vertical or floor mount position only. The adapters’ prongs are not designed to hold the weight of the parent unit and the baby unit, so do not connect them to any ceiling, under-the-table, or cabinet outlets. Otherwise, the adapters may not properly connect to the outlets.
  • Make sure the parent unit, the baby unit, and the power adapter cords are out of reach of children.
  • To maintain compliance with the FCC’s RF exposure guidelines, place the baby unit at least 20cm from nearby persons.

vtech Full Color Pan and Tilt HD Video Monitor User Guide  & troubleshooting 9

Raise the parent unit antenna for better reception

vtech Full Color Pan and Tilt HD Video Monitor User Guide  & troubleshooting 10

Connect the baby monitor (Cont’d)

Charge the parent unit battery before use
When you have connected and turned on the parent unit, the battery will be charged automatically.

vtech Full Color Pan and Tilt HD Video Monitor User Guide  & troubleshooting 11 NOTES

  • Before using the baby monitor for the first time, charge the parent unit battery for 12 hours. When the parent unit battery is fully charged, the battery icon becomes solidvtech Full Color Pan and Tilt HD Video Monitor User Guide  & troubleshooting 12.
  • .It takes longer to charge the battery when the parent unit is turned on. To shorten the charging time, turn the parent unit off while charging.
  • The standby time varies depending on the sensitivity level you set, your actual use, and the age of the battery.
    The battery icon indicates the battery status (see the following table).

vtech Full Color Pan and Tilt HD Video Monitor User Guide  & troubleshooting 13

Battery indicators Battery status Action
The screen displays vtech Full Color Pan and Tilt HD Video Monitor User Guide  & troubleshooting 14 .Thevtech Full Color Pan and Tilt HD Video Monitor User Guide  & troubleshooting 15 light flashes. The battery has very little charge and may be used for only a short time. Charge without interruption (about
30 minutes).
The battery icon becomes solid vtech Full Color Pan and Tilt HD Video Monitor User Guide  & troubleshooting 16.

.

The battery is fully charged. To keep the battery charged, connect it to AC power when not in use.

Power on or off the baby monitor

  1. Slide the switch to ON to power on your baby unit.
    vtech Full Color Pan and Tilt HD Video Monitor User Guide  & troubleshooting 17
  2. After the parent unit is fully charged, press POWER until the welcoming screen appears.
    vtech Full Color Pan and Tilt HD Video Monitor User Guide  & troubleshooting 18

Positioning the baby monitor

vtech Full Color Pan and Tilt HD Video Monitor User Guide  & troubleshooting 19

vtech Full Color Pan and Tilt HD Video Monitor User Guide  & troubleshooting 20

vtech Full Color Pan and Tilt HD Video Monitor User Guide  & troubleshooting 21

vtech Full Color Pan and Tilt HD Video Monitor User Guide  & troubleshooting 22 NOTES

  • To avoid interference from other electronic devices, place your baby monitor at least 3 feet (1 meter) away from devices such as wireless routers, microwaves, cell phones, and computers.

vtech Full Color Pan and Tilt HD Video Monitor User Guide  & troubleshooting 23 Caution

vtech Full Color Pan and Tilt HD Video Monitor User Guide  & troubleshooting 24• The default volume of your parent unit is level 3, and the maximum volume is level 5. If you experience high-pitched screeching noise from your baby monitor while  positioning:
– Make sure your baby unit and parent unit are more than 3 feet (1 meter) apart, OR
– Lower the volume of your parent unit.

Status check

Once you power on both your baby unit and parent unit, your parent unit displays image from the baby unit, and the LINK LED light turns on.
The green LED light of the baby unit turns on.

vtech Full Color Pan and Tilt HD Video Monitor User Guide  & troubleshooting 25

vtech Full Color Pan and Tilt HD Video Monitor User Guide  & troubleshooting 26 Basic operation – Parent unit

Adjust speaker volume
Press -VOL / VOL+ to adjust your parent unit speaker volume. It determines the volume of sound transmitted from your baby unit.

vtech Full Color Pan and Tilt HD Video Monitor User Guide  & troubleshooting 27

Talk to your baby via the baby unit

  1. Press and hold the TALK key.
  2. When the vtech Full Color Pan and Tilt HD Video Monitor User Guide  & troubleshooting 28icon displays on-screen, speak to your parent unit. Your voice is transmitted to the baby unit.
  3. When finish talking, release the TALK key and hear your baby again.

vtech Full Color Pan and Tilt HD Video Monitor User Guide  & troubleshooting 29

Zoom
Press vtech Full Color Pan and Tilt HD Video Monitor User Guide  & troubleshooting 30to zoom in or out.

vtech Full Color Pan and Tilt HD Video Monitor User Guide  & troubleshooting 31

Turn on/off the parent unit screen
You can turn on or off the parent unit screen without powering off the parent unit. You can still hear sounds from the baby unit.

  • Press POWER on the parent unit to turn off the screen.
  • Press any keys on the parent unit to turn on the screen again.

vtech Full Color Pan and Tilt HD Video Monitor User Guide  & troubleshooting 32

Use the menu

Press MENU to enter the menu, choose a menu item or save a setting. You can use the parent unit for advanced settings or operations, such as to play or stop the baby unit lullaby, or to adjust the baby unit sound sensitivity.

While in the menu:

  • Pressvtech Full Color Pan and Tilt HD Video Monitor User Guide  & troubleshooting 33 or scroll among the menu options.
  • Press SELECT to select an item, or to save a setting.
  •  Press TALK to return to the live video.
  • Press vtech Full Color Pan and Tilt HD Video Monitor User Guide  & troubleshooting 34to go to the Help & info page.

vtech Full Color Pan and Tilt HD Video Monitor User Guide  & troubleshooting 35

vtech Full Color Pan and Tilt HD Video Monitor User Guide  & troubleshooting 36 Overview – Parent unit

  1. LINK LED light
  2. vtech Full Color Pan and Tilt HD Video Monitor User Guide  & troubleshooting 37 LED light
  3. 3- level sound indicator light
  4. TALK
    • Press and hold to talk to the baby unit.
    • While in a submenu, press to exit.
  5. vtech Full Color Pan and Tilt HD Video Monitor User Guide  & troubleshooting 38
    • Press to zoom in/out.
    • When in the main menu, press to go to the Help & Info page.
  6. Arrow keys
  7. MENU/SELECT
    • Press to enter the main menu.
    • While in a menu, press to choose an item, or save a setting.
  8. – VOL/ VOL +
    • Increase or decrease parent unit’s volume.
  9.  Microphone
    vtech Full Color Pan and Tilt HD Video Monitor User Guide  & troubleshooting 39
  10. POWER key
  11. Power jack
  12. RESET
    Force reboot the parent unit.
  13.  Antenna
  14. Speaker
  15.  Stand
    vtech Full Color Pan and Tilt HD Video Monitor User Guide  & troubleshooting 40

vtech Full Color Pan and Tilt HD Video Monitor User Guide  & troubleshooting 41 Overview – Baby unit

  1. Microphone
  2. Camera lens
  3. Light sensor
  4. LED indicator
  5. Infrared LEDs
  6. vtech Full Color Pan and Tilt HD Video Monitor User Guide  & troubleshooting 42 ON/OFF switch
  7. Antenna
  8. Speaker
  9. Temperature sensor
    • Position the sensor horizontally for
    its optimal usage.
  10. Power jack
  11. Threaded socket for wall mounting
  12. Pair button

vtech Full Color Pan and Tilt HD Video Monitor User Guide  & troubleshooting 43

Need help?

For operations and guides to help you using your video monitor, and for the latest information and supports, go and check the online help topics and online FAQs.
Use your smartphone or mobile device to access our online help.

https://vttqr.tv/?q=1VP69

  • Scan the QR code on the right. Launch the camera app or QR code scanner app on your smartphone or tablet. Hold the device’s camera up to the QR code and frame it. Tap the notification to trigger the redirection of the online help.
    – If the QR code is not clearly displayed, adjust your camera’s focus by moving your device closer or further away until it is clear.
    You can also call our Customer Support at 1 (800) 595-9511 [in US] or 1 (800) 267-7377 [in Canada] for help.

vtech Full Color Pan and Tilt HD Video Monitor User Guide  & troubleshooting 45
https://vttqr.tv/?q=1VP69

vtech Full Color Pan and Tilt HD Video Monitor User Guide  & troubleshooting 46 Parent unit icons

Main menu icons

Main menu

vtech Full Color Pan and Tilt HD Video Monitor User Guide  & troubleshooting 47 Monitoring mode (For VM919-2HD only)

vtech Full Color Pan and Tilt HD Video Monitor User Guide  & troubleshooting 48
  • Baby unit 1 in Single-mode
vtech Full Color Pan and Tilt HD Video Monitor User Guide  & troubleshooting 49
  • Baby unit 2 in Single-mode
vtech Full Color Pan and Tilt HD Video Monitor User Guide  & troubleshooting 50
  • Patrol mode
vtech Full Color Pan and Tilt HD Video Monitor User Guide  & troubleshooting 51
  • Split mode

Melodies and soothing sounds

  • Select play all melodies, or play one of the five melodies and four soothing sounds.

Timer
vtech Full Color Pan and Tilt HD Video Monitor User Guide  & troubleshooting 52

  • You can also set the timer to stop playing after 15, 30, or 60 minutes, or playing non stop.

vtech Full Color Pan and Tilt HD Video Monitor User Guide  & troubleshooting 53 Alerts – Sound, motion, and temperature

Sound

  • Select sound Sensitivity level.
  • Turn on/off Sound Detection Alert.
  • Turn on/off Auto Wake Up function.
    (See Sound Detection and Auto Wake Up section)

Motion

  • Turn on/off Motion Alert.
  • Select motion Sensitivity level. (See Motion Detection section)

Temperature

  • Turn on/off Temperature Alert.
    Set the parent unit to beep whenever the room temperature detected by the baby unit falls outside of the set temperature range.
  • Select Minimum temperature for alert range.
  • Select Maximum temperature for alert range.
  • Select temperature Format.
    Set temperature display in Fahrenheit ( ºF) or Celsius ( ºC ).

vtech Full Color Pan and Tilt HD Video Monitor User Guide  & troubleshooting 54 Parent unit settings

  • Adjust parent unit screen Brightness.
  • Turn on/off Dim Mode.

vtech Full Color Pan and Tilt HD Video Monitor User Guide  & troubleshooting 55Baby unit settings

• Turn on/off baby unit’s Status LED.
• Select Field of View.
Choose Wide angle vtech Full Color Pan and Tilt HD Video Monitor User Guide  & troubleshooting 56 or Standard vtech Full Color Pan and Tilt HD Video Monitor User Guide  & troubleshooting 57.
• Adjust baby unit’s speaker Volume.

vtech Full Color Pan and Tilt HD Video Monitor User Guide  & troubleshooting 58General settings

• Turn on/off Low Battery Alert Tone.
Set the parent unit to beep when the battery is low.
• Turn on/off No Link Alert Tone.
Set the parent unit to beep when the link between the parent unit and the baby unit is lost.

Alert icons

vtech Full Color Pan and Tilt HD Video Monitor User Guide  & troubleshooting 59 • Displays when parent unit’s battery is low and needs charging.
vtech Full Color Pan and Tilt HD Video Monitor User Guide  & troubleshooting 60 • Displays when motion is detected at a baby unit.
vtech Full Color Pan and Tilt HD Video Monitor User Guide  & troubleshooting 61 • Displays when sound is detected at a baby unit.
vtech Full Color Pan and Tilt HD Video Monitor User Guide  & troubleshooting 62 • Baby unit detects temperature exceeds the set maximum.
vtech Full Color Pan and Tilt HD Video Monitor User Guide  & troubleshooting 63 • Baby unit detects temperature is lower than the set minimum.

vtech Full Color Pan and Tilt HD Video Monitor User Guide  & troubleshooting 64 Sound Detection and Auto Wake UP

Adjust sound detection sensitivity
You can turn on Sound Detection Alert and adjust the Sound Sensitivity to detect sounds and turn on the parent unit while its screen is switched off or dimmed.
When the baby unit detects sounds that exceed certain levels, the parent unit screen will turn on and the baby unit starts transmitting the sounds to the parent unit, and you can see and hear your baby.
If you have turned on Sound Detection Alert, the parent unit beeps when the baby unitdetect sounds.

Sound Sensitivity level

Level 3 (Highest)
vtech Full Color Pan and Tilt HD Video Monitor User Guide  & troubleshooting 65

Level 2 (Medium)
vtech Full Color Pan and Tilt HD Video Monitor User Guide  & troubleshooting 66

Level 1 (Lowest)
vtech Full Color Pan and Tilt HD Video Monitor User Guide  & troubleshooting 67

Description The parent unit screen and speaker turn on for very small sounds, including background noises from your baby’s room. The parent unit screen and speaker turns on for loud babbling and louder sounds from your baby. The parent unit remains quiet when your baby makes soft sounds. The parent unit screen and speaker turn on for loud crying or screeching sounds from your baby. The parent unit remains quiet when your baby makes soft sounds.

Sound activated screen and audio – Auto Wake Up
When Auto Wake Up is turned on, the parent unit screen stays off to save po wer when the baby unit detects no sound.
Once the baby unit detects sounds that are louder than the chosen sound sensitivity level, the parent unit screen and speaker turn on automatically. The parent unit will then turn off again after 50 seconds of no sound detection.

vtech Full Color Pan and Tilt HD Video Monitor User Guide  & troubleshooting 68Notes
• If you have muted the parent unit speaker, only the parent unit screen will turn on when a sound is detected.
• If you have turned on Auto Wake Up but turned off Sound Detection Alert, the parent unit will wake up when the baby unit detects sounds that are louder than the chosen sound sensitivity level.
vtech Full Color Pan and Tilt HD Video Monitor User Guide  & troubleshooting 69

vtech Full Color Pan and Tilt HD Video Monitor User Guide  & troubleshooting 70 Motion Detection

Adjust motion detection sensitivity
You can turn on Motion Alert and adjust the Motion Sensitivity to detect motions and turn on the parent unit while its screen is switched off or dimmed.
When the baby unit’s camera detects motions that exceed certain levels, the parent unit screen will turn on and the baby unit starts transmitting the sounds to the parent unit, and you can see and hear your baby.
If you have turned on Motion Alert, the parent unit beeps when the baby unit detects motions.

Sound Sensitivity level

Level 3 (Highest)
vtech Full Color Pan and Tilt HD Video Monitor User Guide  & troubleshooting 71

Level 2 (Medium)
vtech Full Color Pan and Tilt HD Video Monitor User Guide  & troubleshooting 72

Level 1 (Lowest)
vtech Full Color Pan and Tilt HD Video Monitor User Guide  & troubleshooting 73

Description The parent unit screen and speaker turn on for small motions, such as yawning or stretching. The parent unit screen and speaker turns on for normal  daily motions, such as people walking around the house. The parent unit screen and speaker turn on for large motions, such as children are chasing or jumping around.

vtech Full Color Pan and Tilt HD Video Monitor User Guide  & troubleshooting 74 Night vision

The baby unit has infrared LEDs that allow you to see your baby clearly at night or in a dark room. When the baby unit being viewed detects low light levels, the infrared LEDs are switched on automatically. The images from the baby unit are in black and white, and vtech Full Color Pan and Tilt HD Video Monitor User Guide  & troubleshooting 75 appears on the screen.

vtech Full Color Pan and Tilt HD Video Monitor User Guide  & troubleshooting 76Notes
• It is normal if you see a short white glare on your parent unit screen as the baby unit is adapting to the dark environment.
• When the infrared LEDs are on, the images are in black and white. This is normal.

vtech Full Color Pan and Tilt HD Video Monitor User Guide  & troubleshooting 77Tip
• Depending on the surroundings and other interfering factors, like lightings, objects, colors and backgrounds, the video quality may vary. Adjust the baby unit’s angle or place the baby unit at a higher level to prevent glare and blurry display.

vtech Full Color Pan and Tilt HD Video Monitor User Guide  & troubleshooting 78 DIM MODE

The parent unit display will dim to conserve energy after 5 minutes of inactivity, in which there is neither key pressed nor alert received from the baby unit.
vtech Full Color Pan and Tilt HD Video Monitor User Guide  & troubleshooting 79

vtech Full Color Pan and Tilt HD Video Monitor User Guide  & troubleshooting 80For VM919-2HD only

Monitoring mode
vtech Full Color Pan and Tilt HD Video Monitor User Guide  & troubleshooting 81

Change different views – Single CAM
Select baby unit vtech Full Color Pan and Tilt HD Video Monitor User Guide  & troubleshooting 82 or baby unit vtech Full Color Pan and Tilt HD Video Monitor User Guide  & troubleshooting 83 to view the image from the baby unit.
vtech Full Color Pan and Tilt HD Video Monitor User Guide  & troubleshooting 84vtech Full Color Pan and Tilt HD Video Monitor User Guide  & troubleshooting 85Change different views – Patrol
Select Patrol mode as your monitoring mode to alternately view the image from baby units and every 10 seconds.
vtech Full Color Pan and Tilt HD Video Monitor User Guide  & troubleshooting 86vtech Full Color Pan and Tilt HD Video Monitor User Guide  & troubleshooting 87Change different views – Split

Select Split mode as your monitoring mode to view the images from both baby units at once.
vtech Full Color Pan and Tilt HD Video Monitor User Guide  & troubleshooting 88 Note
• While in Split mode, you can press <or> to highlight the view of the baby unit vtech Full Color Pan and Tilt HD Video Monitor User Guide  & troubleshooting 89 or baby unit vtech Full Color Pan and Tilt HD Video Monitor User Guide  & troubleshooting 90, and hear the sounds transmitted from the baby unit.
vtech Full Color Pan and Tilt HD Video Monitor User Guide  & troubleshooting 91

vtech Full Color Pan and Tilt HD Video Monitor User Guide  & troubleshooting 92Mount the baby unit on dry wall (optional)

vtech Full Color Pan and Tilt HD Video Monitor User Guide  & troubleshooting 93Notes
• Check for reception strength and baby unit’s angle before drilling the holes.
• The types of screws and anchors you need depend on the composition of the wall. You may need to purchase the screws and anchors separately to mount your baby units.

  1. Place the wall mount bracket on a wall and then use a pencil to mark the top and the bottom holes as shown. Remove the wall mount bracket and drill two holes in the wall (7/32 inch drill bit).
    vtech Full Color Pan and Tilt HD Video Monitor User Guide  & troubleshooting 94
  2. If you drill the holes into a stud, go to step 3.
    • If you drill the holes into an object other than a stud, insert the wall anchors into the holes. Tap gently on the ends with a hammer until the wall anchors are flush with the wall.
    vtech Full Color Pan and Tilt HD Video Monitor User Guide  & troubleshooting 95
  3. Align the wall mount bracket and screws with the holes in the wall as shown. Tighten the screw in the middle hole first, so that the wall mount bracket position is fixed. You can tighten the other screw in the top hole.
    vtech Full Color Pan and Tilt HD Video Monitor User Guide  & troubleshooting 96OR
    3. Insert the screws into the holes and tighten the screws until only 1/4 inch of the screws are exposed.
    vtech Full Color Pan and Tilt HD Video Monitor User Guide  & troubleshooting 97
  4. Place the baby unit on the wall mount bracket. Tighten the screw into the threaded socket at the bottom to secure the baby unit.
    vtech Full Color Pan and Tilt HD Video Monitor User Guide  & troubleshooting 98OR
    4. Place the baby unit on the wall mount bracket. Tighten the screw into the threaded socket at the bottom to secure the baby unit. Align the holes on the wall mount bracket with the screws on the wall, and slide the wall mount bracket down until it locks into place.
    vtech Full Color Pan and Tilt HD Video Monitor User Guide  & troubleshooting 99
  5. You can maximize your baby unit’s viewing angles by tilting the wall mount bracket. Hold the baby unit, and then rotate the knob in anticlockwise direction. This will loosen the joint of the wall mount bracket. Tilt your baby unit up or down to adjust to your preferred angle. Then, rotate the knob in clockwise direction to tighten the joint and secure the angle.
    vtech Full Color Pan and Tilt HD Video Monitor User Guide  & troubleshooting 100

vtech Full Color Pan and Tilt HD Video Monitor User Guide  & troubleshooting 101 Frequently asked questions

Below are the questions most frequently asked about the baby monitor.

Why does the baby monitor not respond normally? Try the following (in the order listed) for common cure:
1. Disconnect the power to the baby units and the parent unit.
2. Wait a few seconds before connecting power back to the baby units and the parent unit.
3. Turn on the baby units and the parent unit.
4. Wait for the parent unit to synchronize with the baby units. Allow up to one minute for this to take place.
Why don’t the lights of the baby unit and parent unit go on when I switch on the units? Perhaps the parent unit’s battery is depleted. Insert the appliance plug into the parent unit and put the adapter in a wall socket. The parent unit will establish connection with the baby unit.
Perhaps the baby unit is not connected to the power. Insert the appliance plug into the baby unit and put the adapter in a wall socket. Then, slide the vtech Full Color Pan and Tilt HD Video Monitor User Guide  & troubleshooting 102 ON/OFF to switch on the baby unit and to establish connection with the parent unit.
Why doesn’t my parent unit charge while connected to AC power? Make sure the power is not controlled by a wall switch.
Why is my screen in black and white? The screen is in black and white during night-time or in a dark room when the night vision feature is activated. This is normal.
Why do I get glare or blurry display on my screen when viewing my baby at night? During night-time or in a dark room, the surroundings and other interfering factors, like lightings, objects, colors and backgrounds may affect the image quality on your parent unit screen. Adjust the baby unit’s angle or place the baby unit at a higher level to prevent glare and blurry display.
Why does the baby monitor produce a  high-pitched  noise? The parent unit and baby units may be too close to each other.
• Move the parent unit away from the baby units until the noise  stops; OR
• Turn down the volume of your parent unit.
Why does the parent unit beep? The baby units may be out of range. Move the parent unit closer to the baby units (but not less than 3 feet).
The parent unit may not have enough charge for the parent unit to perform normally. Charge the battery in the parent unit until the battery icon becomes solidvtech Full Color Pan and Tilt HD Video Monitor User Guide  & troubleshooting 103.
The temperature of your baby’s room may be too high or too low.
Why don’t I hear a sound/Why can’t I hear my baby cry? The parent unit speaker volume may be too low. Press VOL+ to increase the volume, or use the parent unit menu to change sound sensitivity level to the highest level.
Why can’t I establish a connection? Why is the connection lost every now and then? Why are there

sound interruptions?

The baby units may be out of range. Move the parent unit closer to the baby units (but not less than 3 feet).
Other electronic and wireless products may cause interference with your baby monitor. Try installing your baby monitor as far away from these devices as possible.
If you power on only one baby unit, your parent unit may display Make sure baby unit X is on or move closer to baby unit X, and the LINK LED light flashes. Switch to the baby unit you have powered on via menu.

The RBRC seal

vtech Full Color Pan and Tilt HD Video Monitor User Guide  & troubleshooting 104The RBRC seal on the lithium-ion battery indicates that VTech Communications, Inc. is voluntarily participating in an industry program to collect and recycle these batteries at the end of their useful lives, when taken out of service within the United States and Canada.

The program provides a convenient alternative to placing used lithium-ion batteries into the trash or municipal waste, which may be illegal in your area.

VTech’s participation makes it easy for you to drop off the spent battery at local retailers participating in the program or at authorized VTech product service centers. Please call 1 (800) 8 BATTERY® for information on Li-ion battery recycling and disposal bans/restrictions in your area. VTech’s involvement in this program is part of its commitment to protecting our environment and conserving natural resources.

The RBRC Seal and 1 (800) 8 BATTERY® are registered trademarks of Call2recycle, Inc.

FCC and IC regulations

FCC Part 15
This equipment has been tested and found to comply with the requirements for a Class B digital device under Part 15 of the Federal Communications Commission (FCC) rules. These requirements are intended to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

WARNING: Changes or modifications to this equipment not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
To ensure safety of users, the FCC has established criteria for the amount of radio frequency energy that can be safely absorbed by a user or bystander according to the intended usage of the product. This product has been tested and found to comply with the FCC criteria. The baby unit shall be installed and used such that parts of all persons’ body are maintained at a distance of approximately 8 in (20 cm) or more. The transmitter and antenna of the parent unit shall be held at least 1 in (2.5 cm) from your face.

This Class B digital apparatus complies with Canadian requirement:
CAN ICES-3 (B)/NMB-3(B)

Industry Canada
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.
The term ‘’IC:‘’ before the certification/registration number only signifies that the Industry Canada technical specifications were met.
This product meets the applicable Innovation, Science and Economic Development Canada technical specifications.

RF radiation exposure statement
The baby unit complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. The baby unit should be installed and operated with a minimum distance of 8 in (20 cm) between the baby unit and all persons’ body. Use of other accessories may not ensure compliance with FCC RF exposure guidelines. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment complies also with Industry Canada RSS-102 with respect to Canada’s Health Code 6 for Exposure of Humans to RF Fields.

California Energy Commission battery charging testing mode

This baby monitor meets the California Energy Commission (CEC) regulations for energy consumption. Your baby monitor is set up to comply with the energy-conserving standards right out of the box. Follow the instructions to install and charge the battery. The CEC battery charging testing mode is activated while charging. Even if the parent unit is paired to baby units, the CEC battery charging testing mode is activated while it is powered off and charging.

Limited warranty

What does this limited warranty cover?
The manufacturer of this VTech Product warrants to the holder of a valid proof of purchase (“Consumer” or “you”) that the Product and all  accessories provided in the sales package (“Product”) are free from defects in material and workmanship, pursuant to the following terms and conditions, when installed and used normally and in accordance with the Product operating instructions. This limited warranty extends only to the Consumer for Products purchased and used in the United States of America and Canada.

What will VTech do if the Product is not free from defects in materials and workmanship during the limited warranty period (“Materially Defective Product”)?
During the limited warranty period, VTech’s authorized service representative will repair or replace at VTech’s option, without charge, a Materially Defective Product. If we repair the Product, we may use new or refurbished replacement parts. If we choose to replace the Product, we may replace
it with a new or refurbished Product of the same or similar design. We will retain defective parts, modules, or equipment. Repair or replacement of the Product, at VTech’s option, is your exclusive remedy. VTech will return the repaired or replacement Products to you in working condition. You should expect the repair or replacement to take approximately 30 days.

How long is the limited warranty period?
The limited warranty period for the Product extends for ONE (1) YEAR from the date of purchase. If VTech repairs or replaces a Materially Defective Product under the terms of this limited warranty, this limited warranty also applies to the repaired or replacement Product for a period of either (a) 90 days from the date the repaired or replacement Product is shipped to you or (b) the time remaining on the original one-year warranty; whichever is longer.

What is not covered by this limited warranty?
This limited warranty does not cover:

  1. Product that has been subjected to misuse, accident, shipping or other physical damage, improper installation, abnormal operation or handling, neglect, inundation, fire, water or other liquid intrusion; or
  2. Product that has been damaged due to repair, alteration or modification by anyone other than an authorized service representative of VTech; or
  3. Product to the extent that the problem experienced is caused by signal conditions, network reliability, or cable or antenna systems; or
  4. Product to the extent that the problem is caused by use with non-VTech accessories; or
  5. Product whose warranty/quality stickers, product serial number plates or electronic serial numbers have been removed, altered or rendered illegible; or
  6. Product purchased, used, serviced, or shipped for repair from outside the United States of America or Canada, or used for commercial or institutional purposes (including but not limited to Products used for rental purposes); or
  7. Product returned without a valid proof of purchase (see item 2 below); or
  8. Charges for installation or set up, adjustment of customer controls, and installation or repair of systems outside the unit.

How do you get warranty service?
To obtain warranty service in the USA, please visit our website at www.vtechphones.com or call 1 (800) 595-9511.
In Canada, go to www.vtechcanada.com or call
1 (800) 267-7377.
NOTE: Before calling for service, please review the user’s manual – a check of the Product’s controls and features may save you a service call.
Except as provided by applicable law, you assume the risk of loss or damage during transit and transportation and are responsible for delivery or handling charges incurred in the transport of the Product(s) to the service location. VTech will return repaired or replaced Product under this limited warranty. Transportation, delivery or handling charges are prepaid. VTech assumes no risk for damage or loss of the Product in transit. If the Product failure is not covered by this limited warranty, or proof of purchase does not meet the terms of this limited warranty, VTech will notify you and will request that you authorize the cost of repair prior to any further repair activity. You must pay for the cost of repair and return shipping costs for the repair of Products that are not covered by this limited warranty.

What must you return with the Product to get warranty service?

  1. Return the entire original package and contents including the Product to the VTech service location along with a description of the malfunction or difficulty; and
  2. Include a “valid proof of purchase” (sales receipt) identifying the Product purchased (Product model) and the date of purchase or receipt; and
  3. Provide your name, complete and correct mailing address, and telephone number.

Other limitations
This warranty is the complete and exclusive agreement between you and VTech. It supersedes all other written or oral communications related to this Product. VTech provides no other warranties for this Product. The warranty exclusively describes all of VTech’s responsibilities regarding the Product. There are no other express warranties. No one is authorized to make modifications to this limited warranty and you should not rely on any such modification. State/Provincial Law Rights: This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state or province to province.
Limitations: Implied warranties, including those of fitness for a particular purpose and merchantability (an unwritten warranty that the Product is fit for ordinary use) are limited to one year from the date of purchase. Some states/provinces do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. In no event shall VTech be liable for any indirect, special, incidental, consequential, or similar damages (including, but not limited to lost profits or revenue, inability to use the Product or other associated equipment, the cost of substitute equipment, and claims by third parties) resulting from the use of this Product. Some states/provinces do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.
Please retain your original sales receipt as proof of purchase.

For more support information
vtech Full Color Pan and Tilt HD Video Monitor User Guide  & troubleshooting 105

Technical specifications

Frequency control Crystal controlled PLL synthesizer
Transmit frequency Baby unit: 2.406-2.475GHz
Channels 32
LCD 7’’ Color LCD (IPS 1200×800 pixels)
Nominal effective rangePower requirements Maximum power allowed by FCC and IC. Actual operating range may vary according to environmental conditions at the time of use.
Frequency control Parent unit: 3.7V Lithium-ion battery Baby unit and parent unit power adapters:
Output: 5V DC @ 1000mA or 5V DC @ 1500mA
Credits:

The Background Noise sound file was created by Caroline Ford, and is used under the Creative Commons licThe Stream Noise sound file was created by Caroline Ford, and is used under the Creative Commons license.
The Crickets At Night sound file was created by Mike Koenig, and is used under the Creative Commons license.
The Heart Beat sound file was created by Zarabadeu, and is used under the Creative Commons license.

vtech Full Color Pan and Tilt HD Video Monitor User Guide  & troubleshooting 106Specifications are subject to change without notice.
© 2021 VTech Communications, Inc. All rights reserved.
01/21. VM919-XHD_QSG_V2.vtech Full Color Pan and Tilt HD Video Monitor User Guide  & troubleshooting 107

References

FAQ


Setting up vtech Full Color Pan and Tilt HD Video Monitor User Guide is easy with these step-by-step instructions. Follow the steps are you are set-up in no time.

Using vtech Full Color Pan and Tilt HD Video Monitor User Guide is simple by using this manual. Follow the instructions one by one and everything will be fine

Is vtech Full Color Pan and Tilt HD Video Monitor User Guide stuck or not working properly? By resetting it you can set it back to the standard settings and everything should be back to normal. This works in many cases when problems arise.

This page contains the complete user instructions & manual for vtech Full Color Pan and Tilt HD Video Monitor User Guide

All symbols, colors and codes for vtech Full Color Pan and Tilt HD Video Monitor User Guide are explained in this instruction manual. You can find everything you need and moree