Vtech Speakerphone with caller ID/call waiting User Manual

Vtech Speakerphone with caller ID/call waiting User Manual & troubleshooting

Vtech Speakerphone with caller ID/call waiting User Manual

Vtech Speakerphone with caller ID/call waiting User Manual  & troubleshooting 1

Contents hide

Important safety information

The applied nameplate is located at the bottom of the product base.

Vtech Speakerphone with caller ID/call waiting User Manual  & troubleshooting 2This symbol is to alert you to important operating or servicing instructions that may appear in this user’s manual. Always follow basic safety precautions when using this product to reduce the risk of injury, fire, or electric shock.

Safety information
  • Read and understand all instructions in the user’s manual. Observe all markings on the
  • Avoid using a telephone during a thundersto There may be a slight chance of electric shock from lightning.
  • Do not use a telephone in the vicinity of a gas If you suspect a gas leak, report it immediately, but use a telephone away from the area where gas is leaking. If this product is a cordless model, make sure the telephone base is also away from the area.
  • Do not use this product near water or when you are For example, do not use it in a wet basement or shower, nor next to a swimming pool, bathtub, kitchen sink, and laundry tub. Do not use liquids or aerosol sprays for cleaning. If the product comes in contact with any liquids, unplug any line or power cord immediately. Do not plug the product back in until it has dried thoroughly
  • Install this product in a protected location where no one can trip over any line or power co Protect cords from damage or abrasion.
  • If this product does not operate normally, see the Troubleshooting If you cannot solve the problem, or if the product is damaged, refer to the Limited warranty. Do not open this product except as may be directed in your user’s manual. Opening the product or reassembling it incorrectly may expose you to hazardous voltages or other risks.
  • If this product has replaceable batteries, replace batteries only as described in your user’s manual. Do not burn or puncture batteries—they contain caustic chemicals.
  • If this product has a three-prong (grounding) plug or a polarized plug with one wide prong, it may not fit in outlets that are not polarized. Do not defeat the purpose of these plugs. If they do not fit in your outlet, the outlet should be replaced by an electrician.

Battery warning information

CAUTION:

To reduce the risk of fire or injury to persons or damage to the telephone, read and follow these instructions carefully:

  1. Use only four AA alkaline batteries (not included).
  2. Dispose of these batteries in a safe Do not burn or puncture. Like other batteries of this type, if burned or punctured, they could release caustic material which could cause injury.
  3. Do not open or mutilate the Released electrolyte is corrosive and may cause damage to the eyes or skin. It may be toxic if swallowed.
  4. Exercise care in handling batteries in order not to create a short circuit. Do not allow conductive materials such as rings, bracelets, or keys to touch the The battery or conductor may overheat and cause harm.
  5. Use the battery identified for use with this product only in accordance with the instructions and limitations specified in this
  6. Observe proper polarity orientation between the battery and metallic co
  7. Do not disassemble your telephone. There are no serviceable parts Refer to qualified service personnel for servicing.
  8. To prevent risk of fire or battery explosion, replace with the correct battery Dispose of used batteries according to the instructions.

What’s in the box

Your package contains:
  • Telephone base with mounting bracket and directory card attached.
  • Handset
  • Coiled handset cord
  • Telephone line cord
  • Abridged user’s manual

Basic steps to set up & operate your phone

Basic installation
  1. Install battery
  2. Install telephone base
    Common settings
  3. Set the date and time
  4. Set ringer volume
  5. Set contrast
  6. Set home area code
  7. Set local area code
  8. Directory
    Common operations
  9. Speed dial
  10. Caller ID
Optional Installation

Wall-mount installation (optional)

Install battery

This telephone requires four alkaline AA batteries (not included). When there is no battery installed or the power of the installed batteries is low, this telephone will work only to make or answer calls with the handset.

  1. Press down and pull to open!
    Vtech Speakerphone with caller ID/call waiting User Manual  & troubleshooting 3
  2. Insert 4 AA alkaline batteries!
  3. Vtech Speakerphone with caller ID/call waiting User Manual  & troubleshooting 4Close and snap into place!

CAUTION: Always unplug the telephone line cord before installing new batteries.

Install telephone base

1.
Vtech Speakerphone with caller ID/call waiting User Manual  & troubleshooting 5

if you have DSL high-speed Internet service, a DSL filter (not included) is required. The DSL filter must be plugged into the telephone wall jack
2.
Vtech Speakerphone with caller ID/call waiting User Manual  & troubleshooting 6

Set date and time

  1. Press MENU/SELECT repeatedly until the screen displays:
    DATE/TIME 1-01 12:00AM
  2. Use the dial pad keys (0-9) to change the blinking
    • Press Vtech Speakerphone with caller ID/call waiting User Manual  & troubleshooting 7Vtech Speakerphone with caller ID/call waiting User Manual  & troubleshooting 8or  to move to the previous or next
    • Press # (pound key) to select between AM and PM.
  3. Press MENU/SELECT to save the new setting and move to the next option.

Set Ringer volume

Slide the ringer switch to adjust ringer volume. Vtech Speakerphone with caller ID/call waiting User Manual  & troubleshooting 9  appears on the screen means the ringer is off.
RINGER OFF-LO-HI) design Slide the ringer switch to select your preferred ringer volume.

Vtech Speakerphone with caller ID/call waiting User Manual  & troubleshooting 10

Set contrast

Adjust the screen brightness to a comfortable level, from 1 (light) to 4 (dark).

  1. Press MENU/SELECT repeatedly until the screen displays:
  2. PressVtech Speakerphone with caller ID/call waiting User Manual  & troubleshooting 11 orVtech Speakerphone with caller ID/call waiting User Manual  & troubleshooting 12 until the screen displays the contrast level you
  3. Press MENU/SELECT to save the se

 Set home area code

A home area code must be programmed to use the display dial feature.

  1. Press MENU/SELECT repeatedly until the screen displays:
    HOME AREA CODE HAC-       
  2. Use the dial pad keys (0-9) to enter the home area code.
    • Press to move to the next
    • Press to
    • Press DELETE to delete a digit

3.Press MENU/SELECT to save the setting

Set local area code

  1. Press MENU/SELECT repeatedly until the screen displays
  2. Use the dial pad keys (0-9) to enter the local area co
    • Press to move to the next
    • Press to
    • Press DELETE to delete a digit.
  • Press MENU/SELECT to save the se
  • Repeat steps 2-3 to set more local area codes

Set directory

This telephone has a directory where you can store up to 25 telephone numbers and names. Numbers can be up to 24 digits long and names can be up to 15 characters.
To add a directory entry:

  1. PressVtech Speakerphone with caller ID/call waiting User Manual  & troubleshooting 13 -> Vtech Speakerphone with caller ID/call waiting User Manual  & troubleshooting 14  or Vtech Speakerphone with caller ID/call waiting User Manual  & troubleshooting 15   -> STORE flashes  -> MENU/SELECT.
  2. Enter the telephone number -> MENU/SELECT.
  3. Enter the name -> MENU/SELECT.

To review and dial a directory entry:

  1. Press Vtech Speakerphone with caller ID/call waiting User Manual  & troubleshooting 16
  2. PressVtech Speakerphone with caller ID/call waiting User Manual  & troubleshooting 17orVtech Speakerphone with caller ID/call waiting User Manual  & troubleshooting 18until REVIEW
  3. Press MENU/SELECT -> Vtech Speakerphone with caller ID/call waiting User Manual  & troubleshooting 19 or  Vtech Speakerphone with caller ID/call waiting User Manual  & troubleshooting 20  to scroll through the directory, then lift the handset or press SPEAKER
    To delete a directory entry:
  1. PressVtech Speakerphone with caller ID/call waiting User Manual  & troubleshooting 21
  2. PressVtech Speakerphone with caller ID/call waiting User Manual  & troubleshooting 22or Vtech Speakerphone with caller ID/call waiting User Manual  & troubleshooting 23 until REVIEW
  3. Press MENU/SELECT -> Vtech Speakerphone with caller ID/call waiting User Manual  & troubleshooting 24 or Vtech Speakerphone with caller ID/call waiting User Manual  & troubleshooting 25 to scroll through the directory -> press DELETE -> MENU/SELECT

Speed Dial

There are 14 speed dial locations (seven upper and seven lower). To access an upper location, press a speed dial key. To access a lower location, press LOWER, then press a speed dial key.
To assign a speed dial entry:

  1. Press a speed dial location, or press LOWER, then the desired speed dial location -> press MENU/SELECT.
  2. Enter the telephone number -> press MENU/SELECT.
To dial a speed dial entry:
  1. Lift the handset or press SPEAKER.
  2. Press the desired speed dial location, or press

LOWER, then the desired speed dial location.

To delete a speed dial entry:

Press the desired speed dial location, or press LOWER, then the desired speed dial location -> Press DELETE -> MENU/SELECT

Caller ID

To review the call history:
  1. Press Vtech Speakerphone with caller ID/call waiting User Manual  & troubleshooting 26 to enter the call histo
  2. Press Vtech Speakerphone with caller ID/call waiting User Manual  & troubleshooting 27 orVtech Speakerphone with caller ID/call waiting User Manual  & troubleshooting 28 to scroll through the caller ID
  3. Press CANCEL to exit and return to idle
To dial a caller ID entry:
  1. Press Vtech Speakerphone with caller ID/call waiting User Manual  & troubleshooting 29 to enter the call histo
  2. Press Vtech Speakerphone with caller ID/call waiting User Manual  & troubleshooting 30 or Vtech Speakerphone with caller ID/call waiting User Manual  & troubleshooting 31 to scroll through the caller ID
  3. Lift the handset or press SPEAKER to c
To delete a caller ID entry:
  1. Press Vtech Speakerphone with caller ID/call waiting User Manual  & troubleshooting 32 to enter the call histo
  2. PressVtech Speakerphone with caller ID/call waiting User Manual  & troubleshooting 33orVtech Speakerphone with caller ID/call waiting User Manual  & troubleshooting 34to scroll through the caller ID -> press DELETE -> MENU/SELECT.
To delete all caller ID entries:
  1. When the telephone is idle,press and hold DELETE -> press MENU/SELECT.
Missed (new) call indicator
  • If you do not want to review the missed calls one by one, but still want to keep them in the caller ID log, you can press and hold CANCEL on the telephone for four seconds when the telephone is

Wall-mount installation (optional)

  1. Vtech Speakerphone with caller ID/call waiting User Manual  & troubleshooting 35
    Vtech Speakerphone with caller ID/call waiting User Manual  & troubleshooting 36
    Vtech Speakerphone with caller ID/call waiting User Manual  & troubleshooting 37
  2. Press to release!
    Vtech Speakerphone with caller ID/call waiting User Manual  & troubleshooting 38
    Vtech Speakerphone with caller ID/call waiting User Manual  & troubleshooting 39
    Vtech Speakerphone with caller ID/call waiting User Manual  & troubleshooting 40
  3. DSL filter (not included) is required. The DSL filter must be plugged into the telephone wall jack.

Vtech Speakerphone with caller ID/call waiting User Manual  & troubleshooting 41

Telephone overview

  • Press to return to idle mode
  • Press and hold for four seconds when the telephone is not in use to erase the missed calls indicator
  • Display the menu
  • Save the setting and advance to the next feature setting
  • Flashes when there is an incoming call
  • Press to delete the displayed entry
  • Press and hold to remove all call history entries when in idle mode
  • Press to save or dial numbers in speed dial locations
  • Press to enter lower locations of speed dial keys
  • Enter the directo Scroll through options when in the feature menu.
  • Review call history records
  • Scroll through options when in the feature menu
  • Redial the last number
  • During a call, press to receive an incoming call if you subscribe to the call waiting service from your telephone service provider.
  • Adjust the speakerphone or handset listening volume.
  • Make or answer a call using speakerphone.
  • Mute the handset orspeakerphone microphone.

Vtech Speakerphone with caller ID/call waiting User Manual  & troubleshooting 42
Vtech Speakerphone with caller ID/call waiting User Manual  & troubleshooting 43

Troubleshooting

If you have difficulty with your product, please try the following suggestions. For customer service, visit our website at www.vtechphones.com, or call 1 (800) 595-9511. In Canada, visit phones.vtechcanada.com, or dial 1 800) 267-7377

No dial tone.
  • Make sure all plugs are connected Inspect the telephone line cord connections at the wall jack and telephone. Also inspect the coiled handset cord connections at both ends.
  • Unplug the telephone and connect it to another wall jack. If it still does not work and other telephones in your home are working, the problem is with this
Telephone does not ring.
  • Try setting the RINGER switch to + or HI.
  • If there are several other telephones on the same line, try disconnecting some of the other Having too many telephones connected can also create problems such as low ringer volume or impaired sound quality during calls.
Difficulty storing numbers in memory.
  • Make sure you are pressing the correct sequence of keys for storing
  • If you are interrupted by a recorded announcement asking you to hang up or by a loud buzzing noise, hang up and store the number without lifting the
Screen is blank.
  • Make sure the batteries are correctly installed.
  • Replace batteries with new
Caller ID isn’t working.
  • Caller ID is a subscription service. You must subscribe to this service from your telephone service provider for this feature to work on your
  • If you subscribe to high-speed Internet service (DSL – digital subscriber line) through your telephone line, you must install a DSL filter between the telephone line cord and the telephone wall The filter prevents noise and caller ID problems caused by DSL interference. Please contact your DSL service provider for more information about DSL filters.
    ID on call waiting or type 2 caller ID.
  • The telephone cannot display the caller ID information if another telephone on the same line is in use. Make sure all extensions are on hook

Screen incorrectly displays IN USE/NO LINE.

  • Make sure the telephone line cord is connected properly

I subscribe to a nontraditional telephone service that uses my computer to establish connections, and my telephone doesn’t work.

  • Make sure your computer is powered
  • Make sure your Internet connection is working
  • Make sure that the software is installed and running for your nontraditional telephone
  • Make sure to plug your USB telephone adapter into a dedicated USB port on your co Do not plug into a multiple port USB hub (USB splitter) that is not powered.
  • In a few rare instances, the USB port on your computer may not have enough power. In these instances, try using a USB hub with its own external power
  • If you are using a firewall, it may prevent access to your nontraditional telephone Contact your service provider for more information.

I’ve set my LCD language to Spanish or French and I don’t know how to change it back to English.

  • When the telephone is idle, press MENU/SELECT, and then enter 3645474#. The LCD language is reset to English and the telephone returns to idle

Maintenance

Taking care of your telephone
  • Your telephone contains sophisticated electronic parts, so it must be treated with
Avoid rough treatment.
  • Place the handset down gently. Save the original packing materials to protect your telephone if you ever need to ship
Avoid water
  • Your telephone can be damaged if it gets wet. Do not handle it with wet Do not install the telephone near a sink, bathtub or shower.
Electrical storms
  • Electrical storms can sometimes cause power surges harmful to electronic equipment. For your own safety, take caution when using electric appliances during sto
Cleaning your telephone
  • Your telephone has a durable plastic casing that should retain its luster for many years. Clean it only with a soft cloth slightly dampened with water or a mild so soap.
  • Do not use excess water or cleaning solvents of any kind.

Remember that electrical appliances can cause serious injury if used when you are wet or standing in water. If the telephone base should fall into water, DO NOT RETRIEVE IT UNTIL YOU UNPLUG THE TELEPHONE LINE CORD FROM THE WALL. Then, pull the unit out by the unplugged cord.

Technical specifications
REN 0.6A
Batteries Four AA alkaline batteries
Operating temperature 32°F – 122°F 0°C – 50°C

FCC and ACTA information

If this equipment was approved for connection to the telephone network prior to July 23, 2001, it complies with Part 68 of the Federal Communications Commission (FCC) rules. If the equipment was approved after that date, it complies with the Part 68 rules and with the Technical Requirements for Connection of Equipment to the Telephone Network adopted by the Administrative Council for Terminal Attachments (ACTA). We are required to provide you with the following information.

1.     Product identifier and REN information

The label on the back or bottom of this equipment contains, among other things, an identifier indicating product approval and the Ringer Equivalence Number (REN). This information must be provided to your telephone service provider upon request. For equipment approved prior to July 23, 2001, the product identifier is preceded by the phrase “FCC Reg No.” and the REN is listed separately. For equipment approved after that date, the product identifier is preceded by “US” and a colon (:), and the REN is encoded in the product identifier without a decimal point as the sixth and seventh characters following the colon. For example, the product identifier US:AAAEQ03T123XYZ indicates the REN would be 0.3.
The REN is used to determine how many devices you can connect to your telephone line and still have them ring when you are called. In most, but not all areas, the sum of all RENS should be five (5.0) or less. You might want to contact your telephone service provider for more information.

2.     Connection and use with the nationwide telephone network

The plug and jack used to connect this equipment to the premises wiring and the telephone network must comply with the applicable Part 68 rules and technical requirements adopted by ACTA. A compliant telephone cord and modular plug is provided with this product. It is designed to be connected to a compatible modular wall jack that is also compliant. An RJ11 jack should normally be used for connecting to a single line and an RJ14 jack for two lines, see installation instructions in the user’s manual. This equipment may not be used with coin telephone lines or with party lines. If you have specially wired alarm dialing equipment connected to your telephone line, ensure the connection of this equipment does not disable your alarm equipment. If you have questions about what will disable the alarm equipment, consult your telephone service provider or qualified installer.

3.     Replacement instructions

If this equipment is malfunctioning, it must be unplugged from the modular wall jack until the problem has been corrected. Replacement to this telephone equipment can only be made by the manufacturer or its authorized agents. For replacement procedures, follow the instructions outlined under the limited warranty.

4.     Rights of the telephone service provider

If this equipment is causing harm to the telephone network, the telephone service provider may temporarily discontinue your telephone service. The telephone service provider is required to notify you before interrupting service. If advance notice is not practical, you will be notified as soon as possible. You will be given the opportunity to correct the problem and the telephone service provider is required to inform you of your right to file a complaint with the FCC. Your telephone service provider may make changes in its facilities, equipment, operation, or procedures that could affect the proper functioning of this product. The telephone service provider is required to notify you if such changes are planned.

Hearing aid compatibility

If this product is equipped with a corded or cordless handset, it is hearing aid compatible.

Programming/testing of emergency numbers

If this product has memory dialing locations, you may choose to store police, fire department and emergency medical service telephone numbers in these locations. If you do, please keep three things in mind:

  1. We recommend that you also write the telephone number on the directory card (if applicable), so that you can still dial the emergency number manually if the memory dialing feature doesn’t work.
  2. This feature is provided only as a convenience, and the manufacturer assumes no responsibility for customer reliance upon the memory feature.
  3. Testing the emergency telephone numbers you have stored is not recommended. However, if you do make a call to an emergency number:

 

    • You must remain on the line and briefly explain the reason for the call before hanging up.
    • Programming/testing of emergency numbers should be performed during off-peak hours, such as in the early morning or late evening, when the emergency services tend to be less busy.

Part 15 of FCC rules

Some telephone equipment generates, uses, and can radiate radio frequency energy and, if not installed and used properly, may cause interference to radio and television reception. This product has been tested and found to meet the standards for a Class B digital device, as specified in Part 15 of the FCC rules. These specifications are designed to provide reasonable protection against such interference in a residential installation. However, there is no guarantee that interference will not occur in a particular installation. If this product causes interference to radio, VCR or television reception when it is in use, you might correct the interference with any one or all of these measures:

    • Where it can be done safely, reorient the receiving radio, VCR or television antenna.
    • To the extent possible, relocate the radio, VCR, television or other receiver with respect to the telephone equipment.
    • If this telephone product runs on AC power, plug your product into an AC outlet that’s not on the same circuit as one used by your radio, VCR or television.
    • Consult a dealer or an experienced radio/TV technician for help.

Modifications to this product, not expressly approved by the manufacturer, could void the user’s authority to operate the equipment.

Limited warranty

1.     What does this limited warranty cover?

The manufacturer of this Vtech branded product warrants to the holder of a valid proof of purchase (“CONSUMER” or “you”) that the product and all accessories provided in the sales package “PRODUCT”) are free from defects in material and workmanship, pursuant to the following terms and conditions, when installed and used normally and in accordance with the PRODUCT operating instructions. This limited warranty extends only to the CONSUMER for products purchased and used in the United States of America and Canada.

2.     What will be done if the PRODUCT is not free from defects in materials and workmanship during the limited warranty period (“materially defective PRODUCT”)?

During the limited warranty period, the manufacturer’s authorized service representative will replace at the manufacturer’s option, without charge, a materially defective PRODUCT. If the manufacturer chooses to replace the PRODUCT, they may replace it with a new or refurbished PRODUCT of the same or similar design. The manufacturer will retain defective parts, modules, or equipment. Replacement of the PRODUCT, at the manufacturer’s option, is your exclusive remedy. The manufacturer will return replacement products to you in working condition. You should expect the replacement to take approximately 30 days.

3.     How long is the limited warranty period?

The limited warranty period for the PRODUCT extends for ONE (1) YEAR from the date of purchase. If the manufacturer replaces a materially defective PRODUCT under the terms of this limited warranty, this limited warranty also applies to replacement PRODUCT for a period of either (a) 90 days from the date the replacement PRODUCT is shipped to you or (b) the time remaining on the original one-year limited warranty; whichever is longer.

4 .This limited warranty does not cover:

  • PRODUCT that has been subjected to misuse, accident, shipping or other physical damage, improper installation, abnormal operation or handling, neglect, inundation, fire, water, or other liquid intrusion; or
  • PRODUCT that has been damaged due to repair, alteration, or modification by anyone other than an authorized service representative of the manufacturer; or
  • PRODUCT to the extent that the problem experienced is caused by signal conditions, network reliability or cable or antenna systems; or • PRODUCT to the extent that the problem is caused by use with nonVtech accessories; or
  • PRODUCT whose warranty/quality stickers, PRODUCT serial number plates or electronic serial numbers have been removed, altered or rendered illegible; or
  • PRODUCT purchased, used, serviced, or shipped for repair from outside the United States of America or Canada, or used for commercial or institutional purposes (including but not limited
  • to products used for rental purposes); or
  • PRODUCT returned without valid proof of purchase (see item
    6); or
  • Charges for installation or setup, adjustment of customer controls, and installation or repair of systems outside the unit

5.     How do you get warranty service?
Charges for installation or setup, adjustment of customer controls, and installation or repair of systems outside the unit.PRODUCT returned without valid proof of purchase (see item 6); or To obtain warranty service in the United States of America, visitwww.vtechphones.com or call 1 (800) 595-9511. In Canada, visitphones.vtechcanada.com or call 1 (800) 267-7377.

NOTE: Before calling for service, please review the user’s manual; a check of the PRODUCT controls and features may save you a service call. Except as provided by applicable law, you assume the risk of loss or damage during transit and transportation and are responsible for delivery or handling charges incurred in the transport of the Products) to the service location. The manufacturer will return replaced PRODUCT under this limited warranty. Transportation, delivery or handing charges are prepaid. The manufacturer assumes no risk for damage or loss of the PRODUCT in transit. If the PRODUCT failure is not covered by this limited warranty, or proof of purchase does not meet the terms of this limited warranty, the manufacturer will notify you and will request that you authorize the cost of replacement prior to any further replacement activity. You must pay for the cost of replacement and return shipping costs for the products that are not covered by this limited warranty.

6.     What must you return with the PRODUCT to get warranty service?

You must:

  1. Return the entire original package and contents including the PRODUCT to the service location along with a description of the malfunction or difficulty; and
  2. Include “valid proof of purchase” (sales receipt) identifying the PRODUCT purchased (PRODUCT model) and the date of purchase or receipt; and
  3. Provide your name, complete and correct mailing address, and telephone number.
7.     Other limitations

This warranty is the complete and exclusive agreement between you and the manufacturer of this VTech branded PRODUCT. It supersedes all other written or oral communications related to this PRODUCT. The manufacturer provides no other warranties for this PRODUCT. The warranty exclusively describes all of the manufacturer’s responsibilities regarding the PRODUCT. There are no other express warranties. No one is authorized to make modifications to this limited warranty and you should not rely on any such modification. State/Provincial Law rights: This warranty gives you specific legal rights, and you may also have other rights which vary from state to state or province to province.
Limitations: Implied warranties, including those of fitness for a particular purpose and merchant ability (an unwritten warranty that the PRODUCT is fit for ordinary use) are limited to one year from date of purchase. Some states/provinces do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. In no event shall the manufacturer be liable for any indirect, special, incidental, consequential, or similar damages (including, but not limited to lost profits or revenue, inability to you

Please retain your original sales receipt as proof of purchase.

 

References

FAQ


Setting up Vtech Speakerphone with caller ID/call waiting User Manual is easy with these step-by-step instructions. Follow the steps are you are set-up in no time.

Using Vtech Speakerphone with caller ID/call waiting User Manual is simple by using this manual. Follow the instructions one by one and everything will be fine

Is Vtech Speakerphone with caller ID/call waiting User Manual stuck or not working properly? By resetting it you can set it back to the standard settings and everything should be back to normal. This works in many cases when problems arise.

This page contains the complete user instructions & manual for Vtech Speakerphone with caller ID/call waiting User Manual

All symbols, colors and codes for Vtech Speakerphone with caller ID/call waiting User Manual are explained in this instruction manual. You can find everything you need and moree