ZAMP SOLAR Common Solar Wiring for Multiple 12-Volt Batteries User Guide

ZAMP SOLAR Common Solar Wiring for Multiple 12-Volt Batteries User Guide & troubleshooting

ZAMP SOLAR Common Solar Wiring for Multiple 12-Volt Batteries User Guide  & troubleshooting 1

ZAMP SOLAR Common Solar Wiring for Multiple 12-Volt BatteriesZAMP SOLAR Common Solar Wiring for Multiple 12-Volt Batteries User Guide  & troubleshooting 2

ALLIGATOR CLIPS

  1. Remove Portable from the rigid nylon travel case
  2. Unlatch the butterfly clasps (45-Watt does not have clasps) and open panels flat
  3. Unfold tilt legs and place panels in direct sunlight
  4. Clip the red alligator clip to the positive battery terminal then clip the black alligator clip to the negative battery terminal
  5. You are now charging your batteries.
  6. The first time you use the unit you may need to configure the charge controller for the appropriate battery type.ZAMP SOLAR Common Solar Wiring for Multiple 12-Volt Batteries User Guide  & troubleshooting 3

SIDEWALL SOLAR PORT

  1. Remove Portable from the rigid nylon travel case
  2. Unlatch the butterfly clasps (45-Watt does not have clasps) and open panels flat
  3. Unfold tilt legs and place panels in direct sunlight
  4. Remove/unclip the alligator clips at the SAE connection
  5. Plug the SAE lead from the panel into the sidewall port on your RV
  6. You are now charging your batteries. The first time you use the unit you may need to configure the charge controller for the appropriate battery type.

COMMON SOLAR WIRING FOR MULTIPLE 12-VOLT BATTERIESZAMP SOLAR Common Solar Wiring for Multiple 12-Volt Batteries User Guide  & troubleshooting 4

  • When wiring a solar port to multiple batteries, it is important to remember that your batteries are wired together.
  • To gain the most from your solar, be sure to place the positive wire on the first battery in the sequence and the negative wire on the last battery in the sequence. This is true regardless of the number of batteries in the bank. ZAMP SOLAR Common Solar Wiring for Multiple 12-Volt Batteries User Guide  & troubleshooting 5

ZAMP SOLAR Common Solar Wiring for Multiple 12-Volt Batteries User Guide  & troubleshooting 6

ZAMP SOLAR Common Solar Wiring for Multiple 12-Volt Batteries User Guide  & troubleshooting 7

ZAMP SOLAR Common Solar Wiring for Multiple 12-Volt Batteries User Guide  & troubleshooting 8

FAQ


Setting up ZAMP SOLAR Common Solar Wiring for Multiple 12-Volt Batteries User Guide is easy with these step-by-step instructions. Follow the steps are you are set-up in no time.

Using ZAMP SOLAR Common Solar Wiring for Multiple 12-Volt Batteries User Guide is simple by using this manual. Follow the instructions one by one and everything will be fine

Is ZAMP SOLAR Common Solar Wiring for Multiple 12-Volt Batteries User Guide stuck or not working properly? By resetting it you can set it back to the standard settings and everything should be back to normal. This works in many cases when problems arise.

This page contains the complete user instructions & manual for ZAMP SOLAR Common Solar Wiring for Multiple 12-Volt Batteries User Guide

All symbols, colors and codes for ZAMP SOLAR Common Solar Wiring for Multiple 12-Volt Batteries User Guide are explained in this instruction manual. You can find everything you need and moree